buying wholesale vape products manufacturer disposable vape private brand list

In questo video ho voluto condividere con voi alcune delle mie tecnologie preferite in una casa giapponese.

Quindi, come molti di voi sapranno, mi sono recentemente trasferito nel mio nuovo appartamento di Tokyo.

Infatti, ho già fatto un tour completo di questo intero appartamento

Quindi, se volete vederlo, date un’occhiata ai link nella descrizione.

Ma una delle cose che non ho trattato completamente è stata la tecnologia utilizzata nelle case giapponesi,

quindi in questo video ho voluto evidenziare alcune delle tecnologie che penso siano piuttosto interessanti in una casa giapponese e alcuni di

voi potrebbero avere familiarità con alcune di questi la tecnologia giapponese è o potresti averla nel tuo paese d’origine.

Ma hanno comunque fatto una lista perché penso che siano davvero fantastici. Ad ogni modo nei commenti. Fammi sapere da quale paese vieni

Cosa c’è di nuovo per te?

Cosa hai visto prima?

Oltre alle cose che ti piacciono davvero molto e finalmente prima di iniziare se vuoi vedere cosa sto facendo ogni giorno

Controlla il mio account Instagram

se vuoi aiutare a supportare il canale controlla il merchandising di Tokyo e se hai domande sul Giappone e dai un’occhiata alla mia

community Discord. Quindi senza ulteriori indugi. Lascia che ti mostri un po’ della mia tecnologia domestica giapponese preferita,

quindi prima di tutto

parliamo del sistema di interfono integrato

come ho menzionato prima in casa per il

video questo sistema di interfono ti consente di vedere chi c’è all’ingresso principale al primo piano

Ma è ha anche alcune caratteristiche uniche piuttosto interessanti che non ho menzionato nell’altro video

La prima cosa che ho pensato fosse piuttosto interessante è che quando qualcuno arriva al primo piano?

Suona il campanello e non sei effettivamente in

casa registrerà su scheda SD e le riprese video che in

realtà sono apparse sullo schermo e non solo funge da sistema citofonico

ma funge anche da sistema di allarme

prima di tutto se hai perdite d’acqua in

casa Ti avviserà anche sull’impianto

Se hai un incendio in casa

Puoi premere questo pulsante proprio qui e avviserò i tuoi vicini che c’è effettivamente un incendio e al lo stesso diritto se i tuoi vicini

hanno un fuoco all’interno della loro casa e premono quel pulsante. Ti avviserà qui sul display

Questo è piuttosto interessante un sistema di interfono ha anche un pulsante di emergenza

Ma non dovresti mai premere davvero, ma nel caso succeda qualcosa e devi chiamare la sicurezza

Puoi premere questo pulsante proprio qui e loro ‘ Verrà su e finalmente il sistema di interfono ha la sua

sicurezza domestica incorporata, il che significa che puoi disarmarlo e armarlo quando vuoi quando hai inserito il sistema di sicurezza

E dì che se qualcuno tenta di entrare dalla porta principale, chiamerà automaticamente sicurezza per te

E in effetti stavo testando tutta questa roba

ho fatto un errore e ho effettivamente fatto scattare l’allarme e la società di sicurezza è venuta qui e si è assicurata che tutto andasse bene

Quindi sì, super sorpreso da questo sistema di interfono

In realtà era più di me inizialmente pensavo fosse un’altra cosa che amo degli appartamenti giapponesi.

Alcuni di loro hanno scatole per le consegne al primo piano?

Quindi, se sei come me,

è probabilmente una delle cose più utili che puoi avere nel tuo appartamento e qualcosa che amo davvero davvero

personalmente Ordino un sacco di cose online specialmente in posti come Amazon ora quando non sei a casa il il corriere può semplicemente mettere il pacco

nella scatola di consegna e poi ogni volta che restituisci quella scatola sta aspettando che tu ritiri

, in realtà è piuttosto carino su questo particolare sistema qui in questo appartamento 1 ti avviserà effettivamente

al sistema citofono che Ti ho mostrato prima che c’era un pacco

effettivamente consegnato anche un’altra caratteristica di questo sistema di scatole di consegna è che non solo puoi ricevere pacchi

ma puoi effettivamente

inviare pacchi, il che significa che se vuoi dare un pacco a qualcuno o come un amico e in realtà non sei qui a

casa tua, puoi metterlo nella scatola di consegna e quindi impostare un codice pin per consentire loro di ritirare il pacco e finalmente questo

sistema ha questa caratteristica in più. In realtà personalmente non l’ho mai usato da solo,

ma c’è scritto servizio di pulizia su di esso

Quindi in pratica se hai il lavaggio a secco puoi usare un sistema per inviare e ricevere il tuo lavaggio a secco per te

che sicuramente non è assolutamente necessario, ma è uno di quelli fantastici cose da avere

Quindi sì, personalmente mi piace il sistema, ma voi ragazzi cosa ne pensate?

Quindi questo prossimo è piuttosto unico per le case giapponesi che hanno costruito una griglia per pesci, fondamentalmente nella console centrale proprio qui

hai un vassoio che puoi estrarre e questo vassoio proprio qui è dove metti il pesce e appena sotto

di esso. In realtà hai un vassoio quando dovresti riempire d’acqua

Quindi il pesce non brucia quindi una volta chiuso

Tutto quello che devi fare è premere il pulsante in questo modo e solo in basso puoi impostare l’ora

1 3 6 9 o 12 minuti e appena sopra hai questi bruciatori che cucineranno il

È piuttosto semplice ma molti giapponesi che cucinano spesso il pesce lo trovano molto utile

Quindi questo prossimo è probabilmente dato ma è ancora una delle mie tecnologie preferite in quella

casa giapponese il lavaggio giapponese lascia

quindi molti di voi già sanno che molte case giapponesi sono dotate di un bagno giapponese, il che significa che ha un giorno e il lavaggio lascia

Funzionalità quindi caratteristiche come la possibilità di regolare la temperatura del flusso o la forza di il flusso è tutto piuttosto standard

Ma questa particolare toilette ha un vero e proprio pulsante per rimuovere l’odore in aggiunta a quello

In realtà ha una funzione di asciugatura che puoi impostare da basso medio e alto

che immagino risolva il problema se si esaurisce la carta igienica o non vuoi non usate mai la carta igienica

E infine per quelli di voi che dimenticano spesso di sciacquarlo

Sciacquare automaticamente per te quando hai finito

Quindi, prima di continuare, volevo fare un rapido ringraziamento al nostro sponsor Mobile Japan sim a causa di sponsor come mobile

Stanno rendendo la vita un po’ più facile per me, Maiko e il bambino

So che molti di voi non sono in grado di viaggiare in Giappone al momento

Ma questo è qualcosa da considerare per i vostri viaggi futuri

Se non lo sapete già

Mobile Japan sim è il modo migliore per connettere i tuoi dispositivi

mobili quando vieni in Giappone e i Sims sono adatti sia per viaggi brevi che per soggiorni più lunghi quando usi il cellulare puoi

facilmente navigare verso tutte le tue destinazioni

Trova i migliori

collegamenti di trasporto traduci menu o frasi o persino aggiornare i tuoi social media con tutte le cose interessanti che stai facendo qui in Giappone

Ecco rapidamente i miei principali motivi per cui dovresti ottenere una scheda SIM mobile per il tuo viaggio in Giappone

Offerta mobile numero uno spedizione gratuita in tutto il mondo dir ectly alla tua porta di casa due

Puoi anche scegliere di ritirare la simulazione quando arrivi in qualsiasi aeroporto o città principale Ed è anche

gratuito tre fantastiche coperture. Usano la stessa rete che uso personalmente su base giornaliera Softbank che copre il

99% della popolazione giapponese perché hanno un’assistenza clienti che parla inglese e cinque la maggior parte dei profitti va in beneficenza

Quindi prendi la tua carta SIM giapponese mobile oggi facendo clic sul link qui sotto e rimani sempre connesso mentre sei in Giappone

Quindi questo prossimo non è tecnologicamente avanzato come alcune delle altre cose in questo video

Ma penso che sia abbastanza intelligente di per sé, giusto?

quindi se sei mai stato in un appartamento giapponese o in un appartamento nel tuo paese d’origine e la porta è stata

sbattuta all’improvviso o se provi ad aprire la porta ed è davvero difficile aprirla, potresti avere questo problema

Fondamentalmente, quello che sta succedendo è che c’è molta pressione dell’aria che si sta accumulando nella stanza

Questo perché forse stai facendo funzionare i ventilatori della cucina mentre stai cucinando o forse stai facendo funzionare i ventilatori nella vasca da bagno

Quindi fai questo mentre hai tutto il porte e finestre chiuse nel tuo appartamento creano un’enorme quantità di pressione dell’aria

Quindi, per alleviare questo, molti nuovi appartamenti giapponesi hanno iniziato a installare queste prese d’aria

Quindi la tecnologia stessa è molto semplice, fondamentalmente

è un buco nel muro con un filtro nel mezzo e proprio all’interno di questo muro

hai questa piccola apertura. Quindi ad esempio, parte da chiuso lo premi

Una volta si apre un po’ e poi lo premi una seconda volta

Si apre un po’ di più e poi lo premi una terza volta e poi si apre completamente

Premendolo ancora una volta dopo di che poi la richiude completamente in generale

Queste prese d’aria sono installate in ogni stanza dell’appartamento. Infatti nel 2003 l’

installazione di queste prese d’aria è entrata a far parte della legge sugli standard edilizi giapponesi. Apparentemente, era una contromisura contro la sindrome dell’edificio malato

SBS e poiché il Giappone è noto per i suoi inverni molto umidi

Uno dei maggiori problemi qui in Giappone è la muffa quando non si ventila adeguatamente il proprio appartamento, soprattutto in inverno

Si crea una situazione perfetta per la formazione di muffe. Quindi, anche se potrebbe avere senso chiudere l’apertura durante i mesi invernali

In realtà è consigliabile lasciare le prese d’aria aperte tutto l’anno

Quindi sì, le prese d’aria potrebbero non essere così interessanti per te, ma ho pensato che fosse abbastanza intelligente da trovare nelle case giapponesi

Quindi avanti è quella vasca da bagno giapponese adesso?

So di averlo già trattato durante il tour di casa, ma vale sicuramente la pena menzionarlo in questo video

Quindi, in pratica, questa unità da bagno che include una doccia e chi è una vasca da bagno

L’intero spazio chiuso è una stanzetta minuscola e quando chiudi questa porta a destra

qui Crea una stanza sigillata dall’acqua e così facendo è

un’unità di condizionamento specializzata e, come accennato nel mio video precedente, puoi trasformare l’intera stanza in un’unità se essiccatore

proprio dietro di me. Hai due pali o puoi appendere i vestiti bagnati,

quindi in pratica

tutto ciò che devi fare è prendere i tuoi vestiti bagnati

appenderli ai due pali proprio dietro di me e poi chiudere lo sportello che crea una tenuta completa e quindi accendere l’

asciugatrice e poi dentro qualche ora i tuoi vestiti sono asciutti

Quindi in pratica scoprirai che è abbastanza comune per i giapponesi prendere i loro vestiti e appenderli fuori sul balcone

Sfortunatamente quando piove non possono farlo

Quindi questa è l’alternativa all’appendere il vestiti fuori in una giornata piovosa a parte che l’unità del bagno AC

ha anche un sistema di ventilazione e come un vento leggero

Ma ciò che è anche interessante è che ha un programmabile?

Funzione di riscaldamento in cui è possibile accendere in modo basso o anche solo per riscaldare la stanza molto molto rapidamente.

Il motivo è che gli inverni in Giappone sono estremamente freddi. E quindi anche queste unità da bagno diventano davvero molto fredde

E quindi non devi fare il bagno o la doccia in una stanza fredda

Tutto quello che devi fare è premere il pulsante del riscaldatore in pochi minuti prima di entrare e tu’

sei a posto, pod vape devices producer (https://vapechina.eleoem.com) quindi mentre siamo qui?

Vorrei anche dedicare un minuto a parlare del bagno automatico nelle case giapponesi

Proprio dietro di me c’è il bagno e alla mia sinistra c’è un pannello di controllo

Quindi in pratica questo pannello di controllo qui

ti permette di impostare la temperatura e il livello dell’acqua premendo un pulsante e una volta impostato tutto fa tutto

automaticamente ogni singola volta quindi tutto ciò che devi fare è premere il pulsante in questo modo e poi come puoi vedere

L’acqua si riempie e tu aspetti qualche minuto e poi hai una vasca piena sii onesto, anche se

io sono una persona che fa la doccia,

ma quelli di voi che amano fare il bagno questo lo rende super facile e

infatti non c’è nemmeno bisogno di venire nella vasca da bagno per accenderlo

Lascia che te lo mostri qui nel cucina dell’appartamento

In realtà hai i comandi proprio qui,

quindi non è necessario andare al bagno per riaccenderlo

Tutto quello che devi fare è premere il pulsante. Ci piace qui accendere la mazza

Auda, maticamente vedere com’è facile. Lascia che ti mostri un’altra cosa. In realtà è piuttosto interessante,

quindi questo prossimo film mi ricorda in qualche modo che

ero un ragazzino, quindi crescendo da ragazzino negli Stati Uniti,

vedevo sempre questa pubblicità nella pubblicità

vedevo questa piccola vecchia nonna cadere e diceva che sono

caduto e non riesco ad alzarmi e poi premeva un pulsante e qualcuno veniva ad aiutarla.

Beh, la sua mazza ha in realtà la stessa caratteristica, ma invece di chiamare la sicurezza o qualcuno che venga in aiuto. Chiama solo fuori

Lascia che te lo mostri

Aprilo

Guarda quello. Qualcuno mi sta chiamando in modo che concluda un video

Fatemi sapere nei commenti cosa ne pensate se questo video vi piace aiutatemi qui quel pulsante mi piace se volete

Supportare il canale guardate il merch di Tokyo se volete vedere cosa sono’ Sto facendo ogni giorno, dai un’occhiata al mio account Instagram

E se vuoi vedere altri video come questo Ragazzi giapponesi

Premi quel pulsante di iscrizione e il pulsante della campanella e ti prenderò ragazzi nel prossimo

disposable pod vape devices private label vapor item china

[Musik]

hvad sker der gutter Maturin baby er her tilbage

igen og hjælper med at holde jer opdateret

med de seneste og bedste

nyheder og teknologi om urtevaping. Nu har vi for

nyligt fået en masse fantastiske nye

voksprodukter fra Eris Tech, og jeg har havde

en bunke sjov af at teste dem og

finde ud af, hvad de går ud på,

nu er vokspiber et fænomen, der har

taget fart i de senere år, jeg mener, det var

kun 10 år siden, at vi ramte

liv med konstant direkte gennem varme

knive og endnu mere moderne indretninger

som kvarts bangers er kun en temmelig

nylig opfindelse. Nu i de sidste 3 til 5

år har jeg set en masse nye

voksprodukter komme på markedet, men lidt har

imponeret mig så meget som denne nye head

banger fra Eris tech nu head

banger er den anden udgivelse i deres

linje af kvartscelle forstøver forstøvere,

og denne er især presserende,

fordi den kommer med to vaping

funktioner, så bortset fra den traditionelle

form for en kammer lille forstøver spole

løsning til at dampe dine dupper har den

også denne lille halskæde, tyk på

bunden, som er indkapslet i et keramisk

hus, men noget kvartskrystal

som en slags støv på ydersiden, og så du

bruger det, ligesom du ville bruge en

traditionel nektarsamler, du bare

springer af. denne lille hætte, sørg for, at

den er skruet ind i batteriet, tryk

knappen ned i et par sekunder for at

få varmen, du skal bare røre den

hen over dit ark koncentrat, nu betyder den

dobbelte funktionalitet, at du ikke kan

bruge begge forstøvere kl. på samme tid,

hvis du har tænkt dig at

få mest muligt ud af dit batteri og

ved enheden, så hvis vi bruger

nektarsamlerforstøveren, skal du skrue ham

i bunden, og du skal tage

denne lille ud hætteforstøver i midten,

så jeg vil nedbryde enheden en lille

smule først, før vi afprøver den og slår

sanddupper, så i bunden af enheden, lige

vor nektaropsamleren norma

t ville blive opbevaret, har den faktisk denne lille

glashætte med silikonelåg,

så du kan gemme din fars kun

op til et gram klatter derinde, og som du

bruger nektaropsamleren, springer du bare

den lille silikonehætte af og dypper den i så

damp i det omfang, du vil, og

så bare pop dem væk igen, så det

kommer med en anden af de små koppe

, så selvom du vil, kan du fylde et pa

kraftfoder op ad gangen, så b

høver vejen ikke bekymre dig om at ta

e hele dit duppesæt og silik

nemåtte med dig nu hvis jeg

bare skulle bruge den almindelige duppepen funktion

og koge denne lille aqua bubbler op

her, som er spildsikker og kan

fyldes fra toppen og den skruer min

lille celle forstøver af i midten eller

du kan også fylde en masse sikkert dem, jeg

foretrækker at tage det af, det er lidt

nemmere at lægge klatter på, så det ligner stort

set en traditionel slags

kopforstøver, den har en kvartsvæg og så har

den disse kvartskrystaller på

indersiden, så den er allerede klædt

lidt op. lidt men qu artz er meget mere

effektivt, jeg finder og forstøver

koncentraterne og siger titanium eller keramik,

og det påvirker ikke smagen

nær så meget, som vi har set et par

af disse kvartsforstøvere komme ind for

nylig, og jeg nyder sådan set virkelig

den måde, de forstøvede

koncentraterne på, så hvis jeg skal bruge det

ligesom den generelle vokspen-

funktion, fylder jeg en lille smule

koncentrat op, som om jeg har skruet det tilbage

i enheden, så gevindet

bare er forbundet med med batteriet og jeg

sætter dette lille atom som baggrund en

lille aqua-bobler tilbage på toppen, og du

kan enten trykke på den på en af to måder, hvis du bare

il bruge den ligesom en kompa

t fra Peraza, du kan ramme den, som den e

eller hvis du vil begrænse

luftstrømmen en lille smule, skal du blot trykke

magnethætten på bunden, så den tændte

for enheden med fem klik,

som med enhver traditionel form for

engangs voksspande eller koncentratvægt,

og denne kommer gennem tre

spændingsindstillinger så du bare tryk på den tre gange for

at vælge din spænding, så den bliver grøn,

som er den laveste og derefter blå, som

er en slags mellemtone, og hvis du kan lide

at ramme et hjerte som mig, kan du bare støde

det op til rødt, så kvartsspolen ind det

betyder, at selvom du slår den ved

en højere temperatur, mister du ikke rigtig

nogen af terpenerne eller smagen eller noget

lignende, det er bare den ekstr

mt rene vaping-oplevelse, så n

hvor jeg har indlæst denne, vil j

g tryk på den, jeg holder bare

knappen på siden nede i et par

sekunder, mens kvinderne Haley,

så dampene får en meget ren smag –

det er slet ikke varmt, selvom du

kun er omkring fem eller seks centimeter

fra forstøveren, når du jeg slår den,

og Aqua Bob ville virkelig hjælpe med at

køle den damp ned, som nemt er

en af de mest behagelige koncentratoplevelser, jeg n

gensinde har haft med en hånd

oldt lokkemad, og jeg vil lige prøv

med nektaropsamleren nu og se

hvis det nu har nogen forskel med

smagen en vigtig bemærkning, jeg vil

fortælle dig, at du skal tage, når du har at gøre

med fordampere som denne og især

med vokspapir, du vil

sikre dig, at du mellem sessionerne eller

før din første brug

brænder forstøveren af. Ved at brænde

forstøveren af kan du slippe af med alle olier eller poten

ielle urenheder, der blev invol

eret under en fremstillingsproces, og de

giver bare en renere slags damp,

så nu hvor jeg skal bruge nekta

opsamlerfunktionen, skal du bare åbne op for min l

lle jobkoncentrat efter at have fjernet

denne forstøver, så hvis dette

bliver nemt, hvis du på en måde samler en lille

smule koncentrat i låget på dit

kammer, eller hvis du bruger som et

dataark noget i den retning, kører du stort

set bare en linje på tværs af toppen, men

for dette er den silikone varmebestandig, så

jeg kan ramme den lige ud af karret,

så jeg vil gerne hente

nektarsamlerforstøveren og bare skrue den

ind i bunden af enheden på denne måde og ba

e pop din ac tual bubbler tilbage på

toppen, og jeg synes, det er en lille smule nemmere

at ramme, da jeg skal samle op, hvis du bare

forvarmer det i et par sekunder først, så hvis

jeg bare holder på denne knap i et

par sekunder

oh wow, så nektarsamleren kører en

lille smule varmere end den indvendige

forstøver. Jeg må sige, så bestemt en

lille smule mindre udtalt terpen-

smag, men en fantastisk sky ikke desto mindre

og i sidste ende en meget ren bageoplevelse,

nu vil jeg slå sættet en lille

smule ned, så du kan se det, der kommer inde i

pandebåndet Jeg kan virkelig godt lide, hvad de har gået

med det, minder mig om en slags

Californien, men dets dispenseringsemballage

eller noget i den stil, sølv og

bronze, sorte blå dele på nogle Oakland

Raiders-stil en ting, jeg virkelig kan

lide, hvordan den er skruet ned, så det er en

magnetisk flip top, den er åben

foran, den viser dig den lille brugervejledning,

den er meget brugervenlig, lille

hurtigstartguide til at få dig til at bage indeni

, den leveres med denne lille

bærepose Jeg har åbnet dem endnu, så det er bare en

mærkevare, sort lille bæretaske, bare

sørg for, at du ikke får støv eller

noget i din enhed, det vil beskytte den

en smule og tilføjer lidt til et lidt af et

diskret element hvis du kigger ind for at

forbruge din klyngehandel på farten

også i sættet, har vi endnu en af

små glaskoncentratbeholdere, så

som jeg sagde før, hvis du kunne

lide, så længe du ikke har nekta

opsamleren, og du kan har

begge disse klasse koncentrat baljer i

enheden på én gang, så jeg

gemte sådan set bare i bunden, så

du virkelig kan være på farten med op til 2

gram koncentrat, og

batteriet på disse ting er fantastisk,

du kan ramt mindst 100 $ mere Jeg har

brugt det i et par dage, og jeg

har ikke engang haft nogen indikation af, at

det er ved at være lavt på batteri, så disse

lokkemad med konstant hastighed, fordi de ikke

genererer varm luft som et kram

, ville så en generel konvektions

vaporizer bare lede tion-teknologien

kræver meget mindre batteri Jeg mener, du

kan tage denne slemme dreng med på vejen i flere

dage ad gangen uden selv at skulle

bekymre dig om at medbringe et ladekabel, så

jeg er ikke, der er et separat lille

voksjob tilbage inde i

Bob steer

put that sammen igen, så også inkluderet

er bare den generelle slags rengøringssæt

og pakkesæt, der kommer med maestro

bosses denne lille nylonbørste, der

følger med den, jeg vil ikke nødvendigvis

anbefale at bruge den til forstøvere,

fordi jeg tror, at den på en måde vil udvik

e en lidt af en tyktflydende belægning på den,

men så længe du har lidt

spritservietter og masser af lilla eller sådan

noget, skal du bare vikle det rundt

om ydersiden, kan du give backer-

bobleren en forstøver en pæn lille ren

og så er det bare fik et generisk lille

pakkeværktøj, så du kan tage

det med i lommen, bare fyld dit

kraftfoder og pigen

headbangers er kun lige blevet droppet, så

hold øje med vores indlæg i

babyens blog og opdatering nogen vil have

det på lager i butikken tak fordi du

så fyre huske at abonnere

wax vape pen suppliers foods-kanalen for at holde dig

opdateret med det seneste og bedste inden for

hjemmevaping-nyheder og -indhold

[Musik]

[Musik]

disposable pod vape devices wholesale wholesale vaping supply private brand

I think it’s really important for people to understand that increasingly the vaping industry and the tobacco industry are tangled into one company, they’re not sort of distinct.In Melbourne, at least, it is so easy to buy a vape and they’re super cheap as well. With vaping, it is extremely easy to hide. It’s not like there is any big, nasty smell that you have to hide from a cigarette. It’s definitely something that is targeted towards younger people. Like, the packaging, like all that sort of stuff. I think it’s really dangerous in that it seems to be more accessible. I didn’t have the opportunities that the kids seem to have now where kids underage can buy online, so they’ve found a loophole. The vaping industry has basically looked at all of the reasons why you shouldn’t smoke and then go, well, vaping doesn’t do any of those. If you would like to access products that have nicotine in them, you’re meant to go through a health professional and access them through a compounding pharmacy or order them from overseas with a valid prescription. That is not what is happening. We’ve got to stop thinking about vaping, and the other alternatives as treatments and consider them as consumer products. I’ve heard just from people in Facebook groups and YouTube comments that it doesn’t matter what the government does. They don’t want to go back to smoking. They will purchase their nicotine illegally on the black market if they have to. They’ll import products illegally, if they have to. They don’t want to go back to smoking. They’ll stockpile stuff if it got to that point. In Australia, we have decades of experience in decreasing the use of tobacco products, and this has not resulted in a black market, despite the fact that we have some of the most expensive cigarettes in the world. Welcome to Chasing Clouds, a QUO podcast series produced in collaboration with the Prince of Wales Hospital Foundation and the Head Neck Cancer Foundation.I’m Ally, editor-in-chief at The QUO, and your host for this series. Chasing Clouds is an evidence-based exploration into the social and public health impact of vaping and e-cigarettes in contemporary Australia. We draw upon the expertise of young people, doctors, educators, vapers, academics and frontline community organisations to bring to light what we need to do moving forward. How do e-cigarette companies get around advertising bans using social media? How connected are e-cigarette companies to Big Tobacco? How can we effectively reduce supply for teenagers? These are some of the questions we will be asking in this episode. We aim to remain neutral, because we’re not funded by the vaping industry, nor Big Tobacco. I think people vape to be cool. Like, it’s the exact same thing as cigarettes back in the day, I guess. Like, most people vape now. When we think about the legal, regulatory and advertising environment of nicotine e-cigarettes, we need to understand how they fit into the wider historical context of tobacco control in public health and realise that Australia is in a unique position. Public health expert, Associate Professor Becky Freeman, on what she thinks is necessary. I think it’s really important to acknowledge, too, that the prevalence of vaping, the behaviour of the vaping industry, the regulatory environment is really different in nations like Canada, US, UK, Australia. Whereas, normally we would put all those nations together and say, “Oh, we all do tobacco control in this way, and we’re in a very similar state”. I think what I’m saying would work in Australia might not necessarily apply to Canada and the US and UK. But in Australia, we are in a unique position that we have not yet seen the mass take-up of vaping products. It’s getting to be what we think is a problem among particularly 18[-] to 24[-year-olds] seems to be the highest users at this point. We have a chance to realise that we don’t face a big vaping, out-of-control problem in this country and we can do that as continuum with the regulations that we have, but tightening them up further. Certainly, in countries like US and UK, where vaping is a lot more entrenched, you have people who have been using vaping products for longer. The regulatory environment is quite different. Perhaps a public education campaign or cessation efforts would work. But I think in Australia, we need to stay the course on tightening down our regulation and really getting aggressive on tobacco control as well. Like, I… I get a little bit frustrated in that, Australia’s always held up as the leader in tobacco control, but our last really innovative policy position was for plain packaging back in 2012. That’s getting on 10 years now. We need to be a little bit more innovative, investing more in tobacco control. We need to be seeing those hard-hitting, emotional campaigns back on the air. We need to be thinking about how we allow tobacco to be sold in this country. Why is it available on in every convenience store, grocery store, every shop corner? We should be reducing the supply of tobacco products as well as addressing vaping, and I think they’re tangled together. I’m concerned that with the sort of uptake in vaping, and the way the tobacco industry has published… is positioning vaping to regain its credibility, we’re losing sight of the fact that we should also be continuing to address tobacco use, which we know will kill at least half to two-thirds of the people who continue to smoke. The solution looks very different for those who consider vaping an effective harm reduction tool that can save countless lives. Dr Colin Mendelsohn of the Australian Tobacco Harm Reduction Association on what he believes motivates tobacco control policy. The evidence is clear that vaping is not only the most effective treatment available, it’s actually the most popular. It’s the most popular quitting aid in Australia and the rest of the world. So, it has the potential to reach so many more people than say Champix or Varenicline, which is used only in a small number of cases. So, it has huge potential. Why is there an objection to it then? Well, the reasons are ideological. There’s the idea that people should just quit smoking. They shouldn’t have to use this halfway option, this safer alternative. There’s political barriers. There’s more political risk in allowing vaping than there is and banning it. Politicians can be seen as being tough against tobacco, whereas that’s not the issue. There are financial issues, there’s 17 billion dollars worth of tobacco tax up for grabs here. There are moral objections, a lot of people, and particularly in tobacco control, feel that it’s wrong for people to be using an addictive drug and that can’t be allowed. There are vested interests, so there are experts and organisations whose legacy is to get people to quit smoking, or they run organisations which are focused on fighting the tobacco industry, and eliminating smoking, and vaping isn’t part of the way they approach things. And it actually might be successful and they didn’t think of it. So, there’s always other stuff going on, including a fear of innovation. We, you know, we see that in so many ways, other areas. And there’s no question vaping will be accepted as it has been in other Western countries. And we’ve seen this before with harm reduction strategies. Strategies like methadone for heroin use, needle exchange programs, there’s relentless opposition and hostile opposition to these these methods, which… But they finally accept it, and we look back years later and say, “Well, why didn’t we do that earlier?”. The evidence was clear, but there’s all this other resistance going on, and it’s very hard to argue with that. You know, I think people who are opposing it are not arguing on the basis of evidence. They’re arguing on all sorts of other intangible facts, which they don’t admit to and may not even be aware of. ENT surgeon Dr Catherine Meller thinks policy needs to tread a fine line. Unfortunately, it’s a well-known fact that there are certain governments around the world who profit directly from the sale of cigarettes and e-cigarettes. So, it becomes very difficult politically to work out how to strike that balance between allowing those individual freedoms versus harm minimisation and avoidance of potential public health, I won’t take disasters, but a worsening overall of our public health. It’s a bit like seatbelts in cars, isn’t it? We’re not going to stop people from driving cars, and we appreciate there’s a risk when you do that, but we try to make it as safe as possible. In Australia, it’s illegal to use, sell or buy nicotine for use in e-cigarettes without a prescription. Retailers such as convenience stores or vape shops found to be selling nicotine vapes can be fined up to $1,100 per offence. According to the Department of Health, New South Wales health inspectors continue to target stores with over 26,000 nicotine vapes being seized in Australia in the month from January to February of this year [2021] alone. Despite this, shopfronts continue to sell nicotine vapes under the counter, and nicotine vapes are only a few clicks away, if you go online. Anyone, potentially of any age, can go online and import them to Australia from overseas. Natalie, whose 14-year-old son is an avid vaper, thinks that traditional cigarettes were harder to access in her youth. I think it’s really dangerous in that it seems to be more accessible. I feel like when we were growing up, traditional cigarettes were harder to get. You needed to have someone who was over 18 who could purchase that from a shop. And, you know, I feel like I didn’t have the opportunities that the kids seem to have now where, you know, kids underage can buy it online. So they’ve found a loophole to it. Associate Professor Dr Becky Freeman on why she thinks the current legislation doesn’t go far enough. When we look at the regulation of vaping products, first, let’s look at them globally. So if you take, for example, the United States, that’s had a very free market for vaping products, they were not limited in how they could advertise, who they could be sold to, where they could be sold. They now have essentially an epidemic of vaping among young people. And one of the leading companies that is owned by one of the big transnational tobacco companies has recently been found in a state-based court to have illegally marketed, intentionally marketed to young people. We don’t want that situation repeated in Australia. In Australia currently, you cannot sell vaping products that contain nicotine in just a shop. If you would like to access products that have nicotine in them, you’re meant to go through a health professional and access them through a compounding pharmacy or order them from overseas with a valid prescription. That is not what is happening. Unfortunately, because there is a strange regulatory loophole where you can sell vaping products in, you know, convenience store, grocery store, wherever, provided they don’t contain nicotine, they’re readily available to anybody. Technically, young people under the age of 18 aren’t allowed to purchase them. But the problem is vaping products that have nicotine in them and ones that don’t, look identical. They’re often mislabelled, so testing that has been carried out by health authorities in Australia. For example, New South Wales Health has found that vapes that are being sold commonly in convenience stores contain nicotine, even though they’re labelled as not. Often, shop owners either don’t understand the law or intentionally are flouting the law and are selling products knowing they contain nicotine in them. So, I think the easiest solution to this would be to simply not allow vaping products that contain nicotine in them to be freely sold on the market, either. And let’s have this very strict regulation that these addictive products, that might help a very small number of smokers, are available through health professionals and pharmacies. From the 1st of October, anyone wanting to import nicotine e-cigarettes into Australia will need a doctor’s prescription. It will be illegal to buy nicotine vaping products or nicotine e-cigarettes, both locally and from overseas websites without one. Associate Professor Becky Freeman doesn’t consider this a major change. In October, there’s a law change coming in at the national, at the Commonwealth level, to clarify that you will need a prescription for both locally purchased vaping products that contain nicotine, which should come from a compounding pharmacy and those that you import from overseas for personal use. That’s actually currently the law in most of the states in Australia anyway. This national law essentially harmonises that and adds clarity. So, it’s not a major change technically. I don’t think it’s going to have an impact on youth vaping rates. We’ll wait and see. We’ll see what the evaluation is. See what the data says. But given that most young people aren’t going through a provider to purchase these products anyway, they’re just buying them either online, from retailers based in Australia, or retailers are importing nicotine free products that actually contain nicotine. That law change doesn’t address that problem. For YouTube personality Sam Parsons, aka the Vaping Bogan, the October legislation is a double standard, given the availability of combustible cigarettes and certain nicotine replacement therapies or NRTs. It’s ridiculous, to be honest. I mean, you don’t need a prescription to go and buy a pack of cigarettes. You don’t need a prescription for the patches, gums, lozenges, which are all a therapeutic good, which is doing essentially… The lozenges and the spray, for example, that is an aerosol. It’s the closest thing to vaping. It’s using the same ingredients, propylene glycol, nicotine and the same flavours go into that spray, yet I don’t need a prescription to go and get that, but somehow vaping requires a prescription. Which is just, it’s another way the government going, “OK, we haven’t quite banned it yet, you can still get it, but we’re going to make it super hard for people to access”, and you’re going to have to go to your doctors. You’re still going to have to import nicotine from overseas, so they’re just quietly and slowly strangling the vapers and and cutting off smokers that could have access to that. It’s not the worst outcome, there are worse outcomes that could have been implemented, but it’s certainly ridiculous and has no basis in reality or science. It’s more enticing to the youth as well. If it’s illegal. “Oh this is now just like it’s not just, you know, something that that’s going to help me quit smoking, it’s suddenly a banned product”. It’s way more enticing for youth, and so having products that aren’t regulated, that are being sold legally, is just far, far more dangerous and harder for the government to control. The police aren’t going to be cruising around and inspecting nicotine. They’ve got a hard enough job with real, real prohibited substances. So, you end up with a black market. If they take a page out of the UK or out of even New Zealand’s notebook, and bring in regulations that allow products to be sold and marketed in a responsible way. Nobody’s advocating for under 18s to be vaping. I’m not saying that we should be encouraging teenagers to vape. That’s ridiculous. But when you don’t allow adults to have access to a life-saving product, that is proven to be far more effective than any of the traditional methods, you’re going to force those adults to access those products from somewhere else. And so it’s just this real sort of closed-minded, got the blinkers on, without actually looking at the real big picture and what other countries have successfully implemented. Going where the silence is. The QUO. An independent media publisher in control of our own agenda. We hold the powerful to account and are accessible to everyone. To support us, head to thequo.com.au, and our socials, using the handle @thequoau. 19-year-old Milly doesn’t want to go back to traditional cigarettes after October. I’m actually quite curious to see what happens in October because one of the other reasons I decided to quit was because, you know, October is coming up very, very fast. And if I don’t have access to a vape that had nicotine in it, I don’t want to start smoking again. But seeing is… Like, there are so many stores. If you go into Brunswick here, or even around Carlton, that literally just say smoke and vape, like they sell vapes, and it’s just kind of like… It’s barely under the table, but… You have to provide your ID and everything, and I would be very, very curious to know if those stores still keep selling those products because I know the ones that I usually buy, they’re shipped in from China. And yeah, I have no idea what kind of like, yeah, regulation is going to go over like, you know, if they’re going to check packages or if… You know, they have like a private kind of shipping thing going on that makes it not be regulated, but yeah, I’m interested to know. Paul Dillon from Drug and Alcohol Research Australia on what he thinks the 1st of October may bring. I think the only thing that will happen is, at the moment, it’s incredibly difficult for Border Patrol, the border, to seize nicotine products because they’re not illegal. They’re illegal to buy or purchase, but to bring them in doesn’t appear to be illegal. I don’t quite understand, but there is very little, very few seizures coming into the country. If you read the TGA kind of recommendation and what’s going to happen, they say very clearly: if you order nicotine products and you do not have the correct permit, you don’t have a prescription from a doctor, we will be seizing them at the border. Implying that they haven’t been. If you look at the Australian Crime Commission report, which has all the kind of the seizure data for the last year, it looks like the only things that they ever really do seize are illicit tobacco, not so much nicotine products. So, I think it could, you could see the number possibly coming through reducing. But the trouble is, when you ban things, it, you know it doesn’t work very well. Yeah, I mean, I think it’s just going to make a whole pile of people who currently are bringing in their nicotine products from overseas totally illegally because they haven’t done through the TGA and everything else, because the prevailing lobby estimate that only between 1% and 2% of all vapers actually do have the permit. So, 98% of nicotine vapers are bringing it in illegal currently… Illegally. So, it just makes a whole pile of people, criminalises a whole pile of extra people because I don’t think they will go to a doctor. I don’t think they will. A lot of GP’s will refuse to prescribe it, I think. There’ll be a kind of a value put onto people bringing them in. And then what you’re going to find is you’re going to find that those people who are willing to prescribe nicotine for vaping, they’re going to become incredibly popular because they’ll be kind of like, “Oh, this one in Bankstown will actually prescribe…” Happened a few years ago with things like steroids, where certain doctors just became known as the place. Their entire surgery was based around just, you know, 10-minute consultations where they would just do a prescription and send the next person in. You get a lot of money doing that. Mark Brooke of the Lung Foundation Australia, thinks we need to learn from the cautionary tale of traditional cigarette availability and go harder on e-cigarettes. Our position on traditional tobacco products was that they should have been banned 50 years ago. On e-cigarettes in particular, you know, if the end goal is abstinence and quitting, then doing that with your health professional makes a lot of sense. Where we really are concerned is around chemical flavours and vaping and sort of one-time vaping pods and other devices being freely sold as a consumer product. We think all the regulations, the compliance around all of that industry, needs to be very carefully looked at. There was an article in the Tasmanian papers this week whether Corner Stores Association are pushing for vaping products to be sold on their corner store. Now, you know, I don’t go and get a heart transplant from an Ampol [petrol station]. I’m not going to go and take smoking cessation device information, now people will go, “But tobacco is already sold as a consumer product, and alcohol’s already …”. Our response to that is if we’ve learnt anything from those two, it’s not to do it with this one. And that’s a really important point that I think the detractors of the model that we’re putting forward say, “Oh, you’re being Pollyanna about it”, “It should be a freedom of choice”. But I’ve never met a hardened smoker who said to me, “I’d encourage young people to vape”. Never. Even the people that are using e-cigarettes to quit go, “Oh God, no, I’d never tell someone to take it up”. So, there’s this sort of contradiction in their argument that we should make it freely available. You know, we’re not in the business of propping up small business or large business to make money at the expense of Australians’ lung health. So, our views are very clear that this is a sector that should really, you know, our own view is that it shouldn’t be sold at all in any form or setting, and the only place you can get an e-cigarette or a vape is via a recognised medical professional as part of a smoking cessation program. And even then, we have significant caveats on that. If we truly want Australia to be tobacco and vape and smoke free, then we have to have a pathway and we have to stand really firm now on liquids being used as chemical … as a consumer product. I think it’s the thin edge of the wedge for another 50 years of lung health misery in Australia and we’ll never sign up for that. Bruce Mansfield of the Minderoo Foundation on why importation restrictions are still needed. The big concern I have is that there was a second piece of legislation that was being considered last year around the importation of e-cigarettes into this country. And that, to me, is a significant loophole or problem with the current legislation, which is that there are no controls around the importation of e-cigarettes at the moment. That bill was put aside, and there is no plan by the government to put that bill up again. So, what it means is even with the TGA changes, if the importation remains as it is, which is freely available and there are no importation restrictions, all that’s going to happen is people are going to import these cigarettes from China, where we have no control over the quality or the source of those devices. And then more concerningly, what you find, particularly in that younger cohort, is young kids and adults through social channels will be marketed e-cigarettes and particularly single-use vape pens. And it’s very much a challenge at the moment, which is most of those single-use pens are either being purchased by young kids and young adults, either across social channels or just in the public domain where they meet someone and they just get this through a transaction that’s done socially. So, how do under-18s usually access nicotine vapes? Year 12 student Bella explains. Usually to get a vape you can either go to, like, a convenience store, like, just like sketchy ones. You can either get like a fake ID or there is just some dealers that you can get them off of. So, there’s lots of different ways you can get them. Yeah, I’ve seen it on TikTok before. They’re like websites and they like, hide it. So, it’ll be like, “Oh, you can get like these lollies, like this flavour”, and then it’s actually like the vape flavour, and then they’ll send it to you in discreet packaging. It’s mainly, like, if you go to apps like Snapchat, there’s always dealers on Snapchat and like, they make it really accessible as well. Like, you don’t need proof of like being 18. They can drop it off for you. You just have to have the money and that’s it. E-cigarette advertising is banned in Australia, but it’s incredibly difficult to monitor and regulate. It is estimated that 30% to 50% of global sales are online. E-cigarette companies have aggressively promoted their products through social media, online influencers and product placement in popular TV shows and movies that normalise and glamorise vaping and associate it with influential celebrities. One experiment here in Australia found that mock ads containing vapes were approved for targeted advertisement to 13 to 17-year-olds. Despite them clearly contradicting Facebook’s advertising policy. At the same time, sales take place on social media, with sites like TikTok offering a platform where companies can advertise to young people for free. JUUL, a San Francisco-based e-cigarette company that launched in 2015, used low-cost marketing through Snapchat, Instagram, Twitter and YouTube to dominate the American market. An investigation into their role in the so-called American youth nicotine addiction epidemic found that they recruited thousands of online influencers to market to teens and deliberately targeted children. Associate Professor Becky Freeman on how public health should respond to the challenges of trying to regulate online advertising. Look, I think it’s really important for people to understand that increasingly the vaping industry and the tobacco industry are tangled into one company. They’re not sort of distinct. You’ve got buyouts happening, you’ve got transnational tobacco companies investing in the development of e-cigarettes and pushing for, in the case of Australia, weaker regulations of vaping products. Now the tobacco industry has an incredible history of being very effective marketers and being very effective at skirting advertising bans. So, if you ban tobacco advertising on television and the radio, they start sponsoring more events and take out magazine ads and billboards. If you ban that level of advertising, they go, “Hmm, maybe we should start sponsoring a motor race or the arts”, and you ban that and they move on to online. So, it’s almost like if you turn off one tap, they’ll find another one that they can quickly turn on until you’re sort of a regulator running around trying to turn off all these taps. Online, obviously, is a poorly regulated environment for lots of kinds of activities. And the tobacco industry has taken advantage of that. So, if you were to hop on, if you’re a young person, you use TikTok regularly. If it gets into your algorithm that you’ve watched someone demonstrating a vaping product, how to use it, or maybe even promoting a particular brand, that’s going to appear in your algorithm more, right? Because that’s how these things work. And so you get increasingly targeted with images of vaping or paid placement of vaping products. And it’s not just TikTok, I’m not picking on the young person’s social media here. You can find Instagram influencers who have been paid by the vaping industry, either with free products or actual cash incentives to post about these products. Not always declaring that it is an ad, either. Facebook as well, Facebook Marketplace, very easy to purchase vaping products through that form. The thing that’s frustrating is that these social media platforms claim to be able to self-regulate and that they all have very strict policies about not allowing vaping companies or tobacco companies to advertise. But it doesn’t take a lot, you know, it doesn’t take a, you know, I guess, a computer hacker to be able to go on to these platforms and quickly find promotions. So, the platforms aren’t enforcing their own voluntary policies and governments are struggling on how better to regulate them as well. We’re really at an advantage in some ways in tobacco control and that we have a global treaty called the World Health Organisation’s Framework Convention on Tobacco Control. And it outlines exactly what we need to do to reduce smoking rates around the world. And one of the key cornerstones of that framework is a comprehensive ban on tobacco advertising, promotion and sponsorship. And it outlines, you know, the different kinds of activities, promotions, ads that the tobacco industry has undertaken and how countries should ban these. In the past ten years, it’s become increasingly apparent that countries that have ratified the framework convention are struggling to ban digital advertising, and it’s going to take cooperation between nations to make that happen. Australia can’t just ban online advertising of vaping and think, “Oh, job’s done, we banned it”, because what about all those sites that young people access that aren’t for Australian companies and don’t originate in Australia? We have no jurisdiction over those things, so we need global cooperation. That’s sort of the number one thing that’s going to be required to limit advertising. It’s also holding social media companies to account. If, you know, one of our major television stations, say Channel Nine, broadcast a tobacco ad, there would be swift action, including fines, threats of losing their licence, et cetera. Why don’t we hold social media companies to those same standards as other broadcasters? So, I think it’s taking what we know from traditional media, and instead of thinking, “Whoa, the internet’s too big and hard, and there’s nothing we can do about it”, applying those same standards to digital-based promotions and media, and having greater global cooperation. These companies are global corporations. Public health also needs to think globally. Paul Dillon on how e-cigarette companies market themselves as the polar opposite of Big Tobacco. We’ve done a great job of making smoking socially unacceptable, and everything about vaping has challenged that. In fact, the vaping industry has basically looked at all of the reasons why you shouldn’t smoke and then go, “Well, vaping doesn’t do any of those”, you know what I mean? So, you know, smoking is not glamorous, smoking is dirty, smoking affects other people around you. You know, you put all of those things. And then, of course, vaping, well, vaping is glamorous. If you look at the ads that we don’t see really in this country, but certainly in the States, they’re all, you know, I mean, they’ve used the classic one is the Audrey Hepburn Breakfast at Tiffany’s one. While I don’t know if you’ve seen that, but they use that same look with a vape. So, all of the kind of messaging that we’ve done around smoking, they’ve kind of reversed and said, “Well, we’re not any of those things”. It appears to have worked. Paul works directly with youth in schools across New South Wales, making them aware of how they’re being manipulated. Remember who these were designed for, people who were… This great worksheet that I created where I showed what originally a cigarette looked like, [and] what they look like now. And the original ones look like a cigarette. They were designed for people who wanted to quit smoking, and now they’re brightly coloured with cotton candy written on the side. Do you think that they may have changed who they’re marketing for? And so, that’s one of the things that we know works with smoking is the deceptive ways that tobacco companies have managed to get customers. So, that’s a very… Young people respond to that quite well. JUUL commands a 42% share of American e-cigarette sales. Currently, 35% of JUUL is owned by Altria, one of the world’s biggest tobacco companies and the manufacturer of Marlboro cigarettes. Altria’s subsidiary company, Philip Morris International, PMI, recently committed to a smoke-free future by 2030, which is in line with Altria’s vision to transition adult smokers to smoke-free alternatives. In a 2019 report to shareholders, PMI revealed that 92% of their total research and development expenses in 2018 related to non-combustible cigarette alternatives. They also have three e-cigarette brands in their product line. Meanwhile, Altria paid $27 billion of dividends to shareholders between 2016 and 2020. The transition to a smoke-free future may be viewed as a socially responsible drive towards harm reduction. But is it enough? Is their goal to diversify their market share? To reduce harm? Or both? Associate Professor Becky Freeman doesn’t think we need PMI to achieve a tobacco-free future. Philip Morris, in particular, has recently come out and said, you know, we could have, you know, the UK and then in response, Australia, the Australian affiliate, also came out and said we could be tobacco free in Australia in the next 10 to 15 years if we allowed e-cigarettes to be, you know, very loosely regulated and promoted at will and sold cheaply, et cetera, et cetera. And I want to push back against that. I think we can get to a tobacco-free nation in Australia in the next 10 to 15 years without the requirement that Philip Morris is allowed to sell its addictive and deadly products on the market, however they like. I think the Australian governments, the state governments, could aggressively implement tobacco control measures and make it a tangible goal that we become a smoke-free, tobacco-free nation and we don’t need Philip Morris driving that bus to make that happen. And we don’t need Philip Morris to benefit financially from Australia, allowing them to come in with new, untested, unproven products. Mark Brooke of the Lung Foundation Australia echoes this sentiment. You know, if we really want to be global citizens, then let’s talk about the predatory behaviour of these organisations. That, on one hand, in the last couple of weeks have said, “We want England to be smoke free by 2030”. But then at the same time, are putting up billboards in the Philippines to attract a new audience where the regulations are not as tight. So, how should the relationship between Big Tobacco and e-cigarette companies inform policy? Paul Dillon believes we must focus on supply. We have to reduce supply. The access that young people and as I said, that number of times, I don’t give a stuff what people do in their in their 20s or 30s. If you want to 510 thread vape vendor (b2b.eleoem.com wrote in a blog post) because you are nicotine dependent, whatever, that’s your choice. But the access that really young kids… I have had an area health service who contacted me and they were having they just had a report of year two’s vaping. Year two’s! These kids are like seven or eight. And I think when you’ve got such young people who have access to it, via either the web or social media apps, certainly you’ve got to try to reduce that access. Now, how do you do that successfully? I think that’s the question. Bruce Mansfield of Minderoo thinks that moving the minimum sale of tobacco products to 21 will reduce supply to youth. The only way to stop the vaping epidemic in the US, and the data that’s come through now has proven that it actually worked, was to increase the minimum sales age of all tobacco products to 21. Now that’s the case in the US, and that’s one of our cornerstone policies, which is, we believe, all tobacco products, the minimum sales age should move to 21 because then it moves them away from high schoolers. Because then both you can’t purchase it as a high school student, nor can you get it from your peers because if you take it at 21, the likelihood of a 16, 17 or 15year-old hanging around with a 21-year-old is a lot less than maybe a 16 and a 19-year-old or a 16 and an 18-year-old. And what we’ve seen in the US is the best evidence base for it, if you just move that to 21, you are 95% less likely to ever smoke. You won’t take up the addiction in the first place. For the Vaping Bogan, Sam Parsons, the genie is way too far out of the bottle for a policy of prohibition to make vaping go away. I’m generally a pretty optimistic person. I think that vaping will continue regardless of what the government does. The genie is so far out of the bottle at this point, and I’ve heard just from people in Facebook groups and YouTube comments that it doesn’t matter what the government does, they don’t want to go back to smoking. They will purchase their nicotine illegally on the black market, if they have to. They’ll import products illegally, if they have to. They don’t want to go back to smoking. They’ll stockpile stuff if it got to that point. A lot of people already are because they don’t want to go back to smoking. So, like we’ve seen in some places in the US, where various states have tried to ban things, it’s created a black market, which is far worse for the government than having a regulated industry where the government in the UK can regulate how much nicotine is in bottles and it all comes out of vape shops. You don’t have people selling vape products out of the back of their car, which is happening in places where the government’s gone full prohibition on it. And that’s what would happen here in Australia. But I’m optimistic that the government will kind of leave us alone once they’ve done the prescription model. I’m hoping that they won’t continue to try and strangle us anymore. But who knows with the government. If we continue to do it that way and they’re still losing money to vapers quitting smoking or smokers quitting via vaping, then they may try something else. But as long as the public is still aware of what they’re trying to do, I’m confident that we can push back enough to continue to have access to the products. Dr Alex Wodak of Harm Reduction Australia thinks legislation needs to focus on making e-cigarettes as accessible as possible to quitting smokers. Where we need to end up is that we want to make it as easy as possible for people who currently smoke to switch to vaping. And that means that we’ve got to stop thinking about vaping and the other alternatives as treatments and consider them as consumer products, like cigarettes. Cigarettes are considered a consumer product. The Therapeutic Goods Administration, the TGA, doesn’t regulate smoking. In fact, the Poisons Standard in Australia excludes tobacco containing nicotine from its remit. Most changes in government policy occur incrementally and slowly, and so we probably won’t get there in one go. But that’s where we need to end up. With tobacco regarded as a consumer product, regulated by the Australian Consumer and Competition Council, the ACCC, and not regulated by the Therapeutic Goods Administration. That’s a monstrosity. Associate Professor Becky Freeman on where she would like tobacco control to move in the future. I think tobacco control, I mean, we’ve had such incredible success in Australia in reducing smoking. If you think back to a few decades ago when, you know, 35% of the country was smoking, and now we’re down to, you know, 15% of adults, and youth smoking rates are negligible. Young people just don’t smoke anymore. It’s really, it’s exciting. It’s a public health win. But to get to that next level, when we get down, say below 5% to near-negligible levels of smoking on a population level, and I’m including in those lower socioeconomic groups where we haven’t done as good a job as well. We need to get aggressive about supply of tobacco products. We’ve done really well on the demand side of things, so making it less attractive to smoke, less people wanting to smoke. So, we’ve made them really expensive. We’ve made the packages really unappealing. We’ve banned all the advertising. We’ve run really emotional, high-impact mass media campaigns, which actually have been off the air, for the past few years, they need to be brought back. But what we haven’t done is say, “Hang on a second. Why do we allow cigarettes to be sold in grocery stores where we buy things like eggs and milk and cheese? Why are they available 24 hours a day, seven days a week from a corner grocery store?”. So, let’s talk about how we can remove these products from our communities and make them less accessible, address the supply of them. The other thing that has never really happened in Australia, which I think would be incredibly impactful, would be to hold the tobacco industry to account for the health damage they’ve done. So, in Canada, for example, the tobacco industry is in the process, it’s been a very long process of being sued for the healthcare costs that have been inflicted by their products. We should do that in Australia as well, and use that money to fund community cessation programs to fund public health programs and to increase the equity of tobacco control programs. Harm reduction includes policies, programs and practices that aim to reduce the harms associated with the use of psychoactive drugs in people who are unable or unwilling to stop. The focus is on the prevention of harm, rather than the prevention of drug use itself. In episode three, we ask whether the use of nicotine vapes should be considered a form of harm reduction and whether vaping is an effective way to help smokers who have tried everything and just can’t quit. Here’s a taste of what’s to come with Dr Alex Wodak. Anybody who’s taken a bet against harm reduction tends to lose it in almost all countries. It often takes a while, but the people who were implacable opponents of methadone treatment, of needle syringe programs, of medically supervised injecting centres, and many other innovations in the harm reduction, drug harm reduction world, they lost almost every debate in almost every country.

disposable vape alibaba disposable vape china

y una alerta de salud muy importante para

informarle sobre Georgia Los funcionarios de salud

ahora están advirtiendo a los padres sobre los

productos de CBD después de los arrestos policiales en

el dueño de una tienda de tabaco y dos empleados que se

cree que estaban vendiendo productos de

CBD mezclados con marihuana sintética esta noche

noticias 4 La presentadora de Jack Melanie Lawson está

investigando Un descubrimiento más profundo de que estos

productos de CBD enriquecidos han enviado a docenas de

personas a la sala de emergencias.

Associated Press descubrió que las personas se están

aprovechando de la popularidad del CBD y, en

lugar de vender a los clientes lo real

, lo están sustituyendo con

marihuana sintética, que puede ser

extremadamente potente. y peligroso no es

un secreto que la popularidad del CBD va en

aumento y por esa razón parece que algunos

están tratando de sacar provecho de una forma potencialmente

peligrosa The Associated Press

probó 38 productos vendidos como CBD en todo

el país, diez de los 30 contenían

marihuana sintética comúnmente Conocido como k2

o Spice, tiene muchas

empresas ahora que venden 10,000 millones. ligram

en una botella por diez dólares, la única

forma en que se pueden hacer es tener

ingredientes cuestionables, está

bien, ese tipo de ruido proviene

de China que nunca se sabe

qué son o el producto no es lo que

dice la

prueba APS se hace eco de lo que las autoridades encontraron en

una encuesta nacional, al menos 128

muestras de 350 analizadas por laboratorios gubernamentales en

nueve estados, casi todos en el sur tenían

productos de marihuana sintética comercializados como

CBD, la mayoría eran productos de cebo, pero

también incluían ositos de goma y otros

comestibles que la FDA es responsable de

regular los productos de CBD, sin embargo, si

contienen narcóticos como la nicotina, la

agencia considera que es trabajo del fiscal de distrito, la DEA

dice que tiene que priorizar las drogas que causan

problemas más graves, como el fentanilo

y el vapeo de metanfetamina, en general, ha sido

objeto de un mayor evlla vape supplies escrutinio recientemente

porque cientos de usuarios tienen desarrolló

esta misteriosa enfermedad pulmonar hasta el momento no se ha identificado ningún

ingrediente único ningún dispositivo o

aditivo único muchos de los casos tienen un vínculo:

involucran el vapeo de marihuana

Canal Melanie Lawson para la estación local

加州华人律师 加州移民律师

Hello everyone, I’m Ai Feili

I’m here again to share with you some knowledge about immigration law and things to pay attention to

So what we are going to talk about today is

If you apply for political asylum

the first

You have to hire a lawyer

I’m not saying that Ai Feili wants my business

You can go wherever you want

But no matter what

You want to hire a lawyer

Because the law of political asylum is very complicated

There are many small details

There have always been precedents, cases

Your lawyer must master these

Because every case is different

Every judge is different

In each area, in each tour area, there are differences between the fifth tour and the second tour and the ninth tour.

You must hire a lawyer who specializes in immigration and asylum

Well understand these cases and these laws

Don’t go to an agency just to save money

why

Because intermediaries are first: they don’t have a legal license, they don’t have a lawyer’s license

So it is illegal for them to provide you with this kind of service

It’s not that intermediaries can’t open their own companies

What can the agent do

He can fill in the form for you

The information you give him, he fills in the form for you

But you can’t ask him what do you know about this?

Do you think I should tick this place or tick that place

If you ask him some legal questions

Then if he answers you

I think this is your political opinion

It’s not necessarily religion, 华人 移民律师 etc.

If he gives you some guidance in this regard

This is legal advice and this is illegal

So first, they are doing something illegal

Would you believe someone who dares to do illegal things?

For example, I can work in a hospital

I can read some books

Can I prescribe medicine for you?

Then this is good for you, I want to prescribe medicine for you

But if anything happens you can’t sue me

Because I’m not a doctor, you already know

So first, it is illegal

second

ability

We see that the agency made a lot of unforgivable mistakes

After we watched it, we thought it was my goodness

It’s just that this thing is really possible to avoid

But they made such a big mistake

So that ability is because they don’t need to take any exams

There is no agency to supervise them

To give them some work standards

You have to study like this, you have to take this exam

How many points do you have to get to be eligible to apply

And because there is no agency to supervise them

So basically they do whatever they want

So we see a lot of intermediaries, they also make customers afraid

For example, there are some people who originally listened to the agency

Then they want to hear us say ok, 华人 移民律师 – marketing.evlla.com, then ask the intermediary to give you your documents

You said the agent didn’t want to give it to me

There is nothing he doesn’t want to give you

It is your right

And because there is no agency directly supervising their behavior

So they feel that these things are very free to do

This is very wrong

So these people are not restricted by any organization

They feel free

You can do whatever you want

And if they cause you a lot of trouble because of their mistakes

You can’t sue them because they are not lawyers

You also know that they are not lawyers

So it was your fault that you (agreeing) did this

And we see there are lawyers in it

But looking at that ratio, it’s because the intermediary is bigger

What’s the matter? It’s a fake thing

Many agencies want to help you make a work card, etc.

Just come over and I’ll simply sign a form for you

Just sign it

Then the client basically doesn’t know what he signed

Later, the consequences were very serious

So first, no matter who you choose

I don’t care if you choose Ai Feili

If you choose me, of course I will be happy to serve you

This is our profession

But you choose someone else

I’m glad too

As long as the person you choose is capable

Because not all lawyers can represent you equally

Many lawyers are not doing this kind of work every day

They do something else

So as long as your lawyer is capable

I’m very happy

But you don’t ask an intermediary

Or you don’t want to do such a case yourself

Do you think simple

It’s not easy

There are many pitfalls

You may not be able to avoid it

So you have to have someone to give you the guidance you need

And immigration status is really a very important investment

So you don’t hire someone to save a few dollars or not at all

You have to take care of yourself and give yourself the value you should have

jbl pcb high frequency pcb manufacturing

como probablemente sepa, esta es una pcb

que significa placas de circuito impreso,

su trabajo es básicamente conectar

componentes eléctricos entre sí

con la ayuda de trazas de cobre y, de

hecho, le mostré en un video anterior

cómo se me ocurrió la idea y el

esquema de este pcb

como lo diseñé y como lo pedí a

través de un

fabricante de pcb, así que no hace

falta decir

que las pcb son a menudo cruciales cuando se

trata de crear sus propios circuitos eléctricos,

especialmente si se trata de smd

ics

que son tan pequeños que nunca puede

soldarlos a mano en una placa de perforación

y usarlos,

el único inconveniente de estos PCB profesionales

es que el fabricante de PCB tarda al menos una semana

en producirlos

y enviarlos, lo cual no es realmente

ideal

cuando solo desea para probar un nuevo

diseño para ic específico

para evitar este problema de tiempo de espera,

probé el grabado

de pcb y el fresado de pcb en videos anteriores

que funcionó hasta cierto punto, pero esos

Los métodos definitivamente no eran mis favoritos,

por eso estaba bastante feliz cuando la

compañía electro se comunicó conmigo

y me envió un paquete enorme en el que

estaban enterrados dos paquetes más pequeños,

uno de ellos era la impresora pcb de escritorio volterra v1

y el otro era su ajuste.

extensión de archivo adjunto doble

y en este video probaré correctamente

esta máquina

e incluso crearé una versión impresa casera

de uno de mis proyectos de PCB más antiguos

para averiguar si una

impresora de este tipo puede reemplazar a los fabricantes de PCB profesionales. Comencemos

[Música]

Este video es patrocinado por elektor,

quien me prestó la impresora pcb que se muestra en

este video

para probarla, ya que electro sabe

que este producto no es asequible para

todos, por

lo que tienen la amabilidad de ofrecer un descuento de 60 en una

membresía de electro verde por un año

con él, obtienes acceso a más de

1000 proyectos de bricolaje de electrónica

y la revista electrónica más nueva en

formato digital cada dos

meses. Recomiendo encarecidamente leerlos e

incluso hice

un En

primer lugar, obviamente tuve que desempacar todos

los paquetes

y eché un vistazo no solo a todo

lo que venía con la impresora,

sino también a la impresora en sí.Debo

decir

que realmente me gusta su propio diseño metálico

y, mientras hablamos de bueno

calidad todos los accesorios con

los que vino la impresora o funcionan en esta

región de calidad,

pero eso es suficiente elogio por ahora,

sigamos encendiendo la impresora, conectándola a

mi computadora,

encendiéndola y navegando a través de su

manual de usuario,

allí me guiaron a volterra

sitio web

en el que había toneladas de

guías escritas y videos sobre cómo usar correctamente

la impresora,

incluso el software más tarde lo toma de las

manos y no solo le dice

qué pasos debe hacer a continuación, sino que también le

muestra cómo hacerlo, por

lo que hay bastante De ninguna manera puedes

estropear algo,

pero eso, por printed circuit boards assembly (szeastwin.evlla.com) supuesto, no me impidió

estropear algo,

pero más sobre eso en un segundo

antes de que instalé y abrí el

software para el impresora

y luego eché un vistazo a los

dos proyectos iniciales en el sitio web de volterra

ahora el proyecto hello world era solo de

una cara

y, por lo tanto, no requería perforar para, por

ejemplo, crear vías

que son algo obligatorias para mis propios

proyectos de pcb,

así que me salté eso uno y, en su lugar, eché un

vistazo a la

consola de juegos de palabras que era de doble cara y viene

con vías

perfectas para comenzar este

diseño.Agregué la capa de sacrificio para

perforar los murciélagos

y sujeté el pcb en blanco en su lugar,

luego hice clic en el icono dual y cargué

el proporcionado. archivos globales para el diseño

en el software que luego quería

delinear

el tamaño del diseño en la placa de circuito impreso en blanco

para eso agregué esta sonda con una

punta larga y fina a la impresora,

que luego realizó una calibración de posición

con la ayuda de sensores mecánicos

y luego delineé el tamaño del

diseño

después de que estuve satisfecho con la posición en la que la

impresora comenzó a medir

la altura de diferentes puntos en la

PCB para luego crear una superficie perfectamente plana

capa

tan pronto como se hizo eso, quité las

almohadillas profesionales,

agregué las brocas de 0,7 milímetros a

los cabezales dobles

tal como el software me pidió que hiciera

y aseguré el taladro a la impresora

después de encender el taladro con una

fuente de alimentación adicional

, era el momento para perforar y lo único

que puedo decir es

que fue súper rápido, así que

repetí este proceso

una vez más, pero esta vez con un

taladro de 1,6 milímetros

que tomó un poco más de tiempo, pero aún así fue

muy rápido,

luego terminé el proceso de perforación

aspirando

el área de trabajo y la limpieza de la pcb

con isopropanol, luego llegó el momento de

imprimir,

para lo cual el software me preguntó rápidamente

qué tinta quería usar,

mi impresora venía con esta y, como

habrás adivinado,

la impresora básicamente deposita esta tinta

que luego actúe

igual que las trazas de cobre, pero de todos modos,

después de seleccionar la correcta, elegí

reutilizar

la alineación de la perforación y dejar que

la impresora

vuelva a medir las alturas en la

placa de circuito

impreso después de Una vez hecho esto, finalmente llegó el momento

de insertar la tinta

en su dispensador y cebarlo para que

salga un poco de la parte superior, luego agregué el

dispensador a la impresora

y dejé que imprimiera un patrón de calibración

en la PCB

en este punto i Tuve que encontrar ajustar la

altura zed

y el efector para los cabezales de impresión, que

después de algunos intentos

arrojaron resultados bastante decentes, lo

que significa que era hora de imprimir con tinta real

que, como puede ver en el software,

tomó un par de minutos,

pero en general no ocurrió nada. problemas

y los resultados no se veían tan mal, lo

siguiente fue curar la tinta simplemente

reutilizando los soportes de montaje para sostener

la tabla plegable en el aire mientras la cama se

calentaba hasta 210 grados centígrados

durante aproximadamente una hora, lo que fue

extraño, aunque

fue que este proceso olía un poco y

creaba vapores, lo

cual fue mi error, ya que

aparentemente ignoré el tutorial

y olvidé quitar la

capa de sacrificio,

pero incluso con este error, la tinta se

volvió dura

y estaba incluso capaz de pulirlo,

por eso continué imprimiendo los

lados inferiores

para obtener la alineación correcta, tenemos que

colocar las almohadillas profesionales

exactamente encima de dos orificios en la placa de circuito impreso, lo

que en realidad fue bastante fácil de hacer

después, el proceso de impresión fue más

o menos el mismo que con la capa superior

y una vez más solo el curado tomó

bastante tiempo

y, una vez hecho esto, imprimí con éxito

una placa de circuito impreso de doble cara, lo

que significa que todo lo que quedaba por hacer

era agregar remaches de 0,4 milímetros para las vrs

y remaches de 1,0 milímetros para los

componentes del orificio pasante,

así que simplemente los empujé en sus

orificios designados

y usé las herramientas de remache dadas y un

martillo para asegurarlos correctamente a

las tablas a

continuación.Finalmente quería soldar todos

los componentes a las tablas

con la ayuda de los

soldadura especializada,

pero como puede ver, dado que arruiné el

curado de los lados superiores,

la tinta simplemente se rompió en el lado inferior,

sin embargo,

acepté la soldadura sin ningún problema, lo

que me dio Espero que mi pcb hecho en casa

quisiera crear a continuación,

el pcb que quiero replicar es

este, es básicamente un

demar de borde de salida de bombilla de CA

que creé en un video anterior

para comenzar, tuve que quitar la gran

área

de cobre del original diseño y tuve que

reemplazarlo

con algunas pistas de conductor más pequeñas a

continuación, prácticamente solo tuve que ajustar

el tamaño del orificio para el vs a 0,7

milímetros

y el tamaño de los

componentes del orificio pasante a 1,6 milímetros

después de exportar los archivos globales

y cargarlos

en el software volterra parece que

todo

debería funcionar bien, así que como se

describe

antes hice la perforación imprimiendo la capa superior

e imprimiendo el proceso de la capa inferior

una vez más

sin experimentar ningún problema significativo

después, aunque me di cuenta de que algunos

rastros de tinta de la capa superior

estaban demasiado cerca entre sí, así

que simplemente usé un cuchillo x-acto para recortar

un poco los rastros de tinta

para que no hubiera pantalones cortos tan pronto

como se hizo.

remaches a las placas y

usé la pasta de soldadura dada

para soldar por reflujo las grasas grandes del mouse

en la pcb,

por supuesto, también puede usar la

pasta de soldadura con la impresora

y refluir con ella, pero no tenía ganas de

hacerlo

porque Me encanta dar soda a mis

componentes

que, por supuesto, continúan haciéndolo, así

que tengo que decir que tuve que experimentar un poco

con los potenciómetros y

el interruptor,

pero en general debo decir que soldar

a la tinta fue fácil de hacer

y al igual que que después de solo cuatro

horas obtuve mi propia pcb casera

que, después de conectarla a dos

voltajes de red, parece funcionar sin ningún

problema,

increíble ahora, a pesar de que mi segunda

impresión de la pcb funcionó sin problemas y el

software y la impresora

son un placer trabajar con ellos dudo mucho

que será el futuro de la fabricación de placas de circuito impreso

,

las razones son simples, no solo la

impresora es muy cara,

sino que también requiere consumibles que

también son bastante caros

y, si bien la tinta es altamente conductora

, ciertamente lo es

no es tan conductivo como un par y

no debe olvidar que la tinta no

viene

con una máscara de soldadura, lo que puede ser un

problema

para ciertos diseños de PCB y, si bien todo

eso

suena bastante negativo, quiero terminar

este

video diciendo que creo que esto La impresora

puede ser realmente útil

para universidades o empresas que

quieran crear prototipos y probar un nuevo

diseño de PCB

en solo un par de horas, pero para mí,

que solo crea videos tontos de YouTube,

la impresora

es un poco demasiado cara, por

lo que la devolveré a electro ahora, pero

todos los

que deseen obtener más información

sobre la impresora pcb volterra

pueden consultar el enlace electro en la

descripción del video de

todos modos.

y te veré la

próxima vez

order from china wholesale manufacturer in chinese

ahoj všichni, jmenuji se alina a toto

je globos, dnes vám řekneme,

jak pracovat s naším systémem a co

zde můžete vidět, jaké funkce jdeme,

takže v horní části lišty vidíme

výběr nabídky, protože

například pro velký byt nebo dům,

můžete mít různé oblasti,

například několik ložnic, china wholesale site jídelna,

obývací pokoj atd. atd., takže

toto je velmi malý citát, protože

existují pouze tři oblasti, ale obvykle

jich je mnoho zvláště

když

po tomto přihlášení

vybíráte, budete potřebovat hodně citátů

pro každou oblast konkrétně,

takže se například podívejme na

obývací pokoj, takže co zde můžeme

vidět, vidíme celkový počet položek v této

nabídce na bydlení v místnosti

také vidíme schválené položky celkem, jak

vidíte, schválili jsme důchod a

odmítáme, nyní jsou zde připojeny všechny položky

, můžete zde vidět kontaktní

údaje svého manažera,

takže kdokoli bude vytvářet vaši nabídku,

bude zde můžete si zde popovídat s

manažerem,

je to obecná chatovací otázka, například

si myslíte, že vám něco chybí, nebo to není

dost dobrý výběr nebo možná

potřebujete více katalogů, můžete všechny

tyto informace napsat přímo sem,

pokud jste se z nějakého důvodu

ztratili v funkce nebo

nevíte, jak to funguje, a dokonce i poté, co jste

viděli video, na něco zde můžete zapomenout

, jsou tipy, na které můžete kliknout sem

a jít krok za krokem

o tom, jak pracovat v systému, pokud si

myslíte, že jste se dostatečně naučili můžete prostě

přeskočit

a už vás to nebude obtěžovat,

podívejme se, co tady ještě máme,

například obývací pokoj v obývacím pokoji

bude mít spoustu položek,

někdy jeden

seznam může mít až 200 položek a

neztratit se v nich můžete

je zde rozdělit,

například můžete chtít pouze vidět

skříňky a police

, vybrat je a můžete vidět pouze

skříňky a police

nebo například chcete vidět pouze měkký

nábytek a vybírat pohovky a

křesla

přímo zde

pro ev Každá položka, kterou můžete schválit nebo

odmítnout,

například odmítnutá

a schválená, jak vidíte, stav

každé položky každé karty se změnil u

každé

karty a každá položka má svůj vlastní graf,

je to velmi výhodné, zejména když

ve specifikaci potvrdíte

textury

um a barvy, protože

s čím jsme se mnohokrát setkali,

že lidé ztrácejí telefony

místo,

například se chcete zeptat na tuto

konkrétní položku a můžete pokládat všechny

otázky přímo zde, můžete znovu schválit nebo

odmítnout a všechny specifikace

jsou zde

kliknutím na obrázek jej můžete

zvětšit

a zobrazit podrobněji,

podívejme se co ještě máme,

celkový počet schválených položek bude

na horní liště

právě tady na tomto náměstí,

toto je součet pro tuto konkrétní

nabídku, pokud chcete vidět součet

pro všechny citáty,

které tu budou, tak

například toto je zvuk jen z

jedné uh citace, kterou jsme dokázali, ale

pojďme do jídelny a něco vylepšit,

opravdu se mi líbí

tato židle

a tato páska

a možná něco v ložnice,

oh, to je báječný gauč

a postel,

myslím, že spolu vypadají

velmi dobře, takže jsme

celkem

schválili položky schválené do ložnice celkem pro položky schválené do jídelny

celkem do obývacího

pokoje a pokud půjdeme na výrobky ze všech

citáty

můžeme vidět schválené položky celkem ze

všech citací

a také schválené položky čekající a

odmítnuté,

co ještě tady

máme, můžeme to pozdravit nebo si můžeme udělat

seznam, když to uděláme alespoň

vidíme větší obrázek můžete také změnit naše

rozhodnutí, například pokud jste to již

odmítli, můžete změnit rozhodnutí a

schválit zde můžete vidět všechny

specifikace,

například tímto způsobem můžete kliknutím

na obrázek zvětšit,

pokud existuje e další

fotografie můžete snadno vidět, že jsou

tam

teď jako tento

a já chci tento konferenční stolek odmítnout,

děkuji za pozornost, budeme vás informovat

o dalších nových funkcích našeho systému

, budeme vás informovat o našich nových

funkcích a uvidíme se příště video ahoj

[Hudba]

outdoor stadium lights maker stadium lights white label

De nacht boven Noord-Londen en Wembley
Stadium, iShinelux beroemd in de voetbalwereld,

was het paradepaardje, eerder deze week
voor het eerst verlicht.

De boog heeft nu meer dan 200 enorme LED-schijnwerpers
en er is hier een echt technologisch

verhaal. Vanuit het oogpunt van sociale media kunnen ze
mogelijk de manier veranderen waarop

voetbalfans naar een wedstrijd kijken.

Vanaf volgend jaar zullen de lichten weerspiegelen waar over
wordt gesproken op sociale media tijdens

live games.

Als mensen bijvoorbeeld tijdens Chelsea v Man Utd
over Chelsea tweeten, zullen er meer blauwe

lichten over de boog oplichten. Tenzij
ze in hun gele uittenue spelen,

zou het meer geel zijn… in ieder geval! De
lichten reageren ook op in-game actie,

zoals uitgaan wanneer er een doelpunt wordt gescoord en reflecteren het
lawaai en sentiment van het publiek.

Dit is allemaal best interessant omdat
de fysieke impact die sociale media hebben

op sport.

Wembley werd eerder deze week ook
gekozen om de finale en halve finales van Euro 2020 te organiseren.

gg 电 竞

Hallo zusammen, ich bin der König der Flügel

Dieses Mal werden wir einen zusammenbauen, Sie können 3A-Meisterwerke reibungslos in 4K-Auflösung spielen

Und es ist ein hochwertiger Gaming-Computer-Host mit Schwarz-Weiß-Farbabstimmung

Im letzten halben Jahr

Aus Gründen des Bergbaus und aus Lagergründen war der Preis für Computerhardware hoch

Bis vor kurzem führte Lao Huang eine Grafikkarte ein, die die Hashrate sowie die Aktivitäten während des 618-Zeitraums sperrt.

Zwar gibt es noch eine gewisse Prämie, aber zumindest ist es nicht so übertrieben, dass sie sich wie bisher verdoppeln wird

Auch die Angebotsmenge ist offensichtlich gestiegen

Ich sehe schon die Hoffnung, eine Karte zum Originalpreis zu kaufen

Endlich können wir zu einem lange verschollenen normalen Installationsvideo kommen

Übrigens, tut etwas gegen die neuen Prozessoren und Grafikkarten, die dieses Jahr veröffentlicht wurden

Ich habe aufgerundet, auch wenn ich das Bewertungsvideo gemacht habe

Wenn man bedenkt, dass der Preis für 4K-Monitore in letzter Zeit gesunken ist

Sie können sogar einen 4K-IPS-Bildschirm mit großem Farbraum für weniger als 2000 Yuan kaufen

Unser Ziel ist es dieses Mal also, 3A-Meisterwerke flüssig in 4K-Auflösung abzuspielen.

Es muss mindestens 60 Frames bei der Lichtverfolgung stabilisieren können

Dann wurden letztes Jahr viele RGB-Lichtverschmutzungs-Hosts installiert

Diesmal ist es also umgekehrt und installiere einen Host ohne RGB

Viele Leute haben einen rein weißen Host gemacht

Also habe ich mich endlich für eine Mischung aus Schwarz und Weiß entschieden

OK, die Einführung ist vorbei, werfen wir einen Blick auf die endgültige spezifische Konfiguration

Die erste ist die CPU und das Motherboard

Diesmal habe ich mich für den 11700K + ROG Z590-A Fusuki Anzug entschieden

Während des 618-Zeitraums dieses Sets erreichte Jingdong ein Minimum von 4000 Yuan

Wenn man bedenkt, dass dieses Motherboard normalerweise für mehr als 2.000 . verkauft wird

Umgerechnet auf 11700K ist fast kein Geld

Das Preis-/Leistungsverhältnis ist so hoch wie auf drei oder vier Etagen

11700K als Rocket Lake i7-CPU der 11. Generation

Die harten Parameter sind im Grunde die gleichen wie beim Flaggschiff i9-11900K

Die Frequenz ist niedriger, aber der Preis ist viel niedriger

Der lautlose 11700K ist etwas niedriger als der 5800X

Nach einer kleinen Übertaktung können Sie zurückgehen.

Das 4K-Spiel, das das Ziel dieses Videos antreibt, ist auch sehr einfach

Gleichzeitig ist es sehr wichtig, dass 11700K mit einem nuklearen UHD750-Display geliefert wird

Es kann Ihnen helfen, Schwierigkeiten zu überwinden, wenn Sie keine Grafikkarte haben

Darüber hinaus verfügt der Core der 11. Generation über einen leistungsstarken Bonus, der nützlich ist

Den AVX512-Befehlssatz, der auch ein leistungsstarker Handwärmer ist, benötige ich nicht.

Es lohnt sich zu überlegen, wann der Preis stimmt

Das Mainboard ist der ROG Player Country Strix Z590-A Schneetreiben im oben genannten Anzug.

Die Weste des Motherboards hat eine relativ seltene silberweiße Farbe und sieht sehr gut aus.

Passend zum Thema dieser Zeit ist der Inhalt des zweiten Elements immer noch sehr hoch

Die Stromversorgung dieses Boards ist in Ordnung, es kann den Stromverbrauch der Übertaktung des Prozessors der 11.

Auch die Erweiterung ist gut, es gibt 6 SATA-Schnittstellen und drei m.2-Slots

Schade, dass die ungenutzten Schnittstellen nicht entfernt und zur Blutrückgabe an den Minenboss verkauft werden können

IO-Schnittstelle hier WiFi 6 drahtlose Netzwerkkarte, 2.5G kabelgebundene Netzwerkkarte

USB 3. Ich weiß nicht wie viel. Wie auch immer, 20G und andere Konfigurationen sind alle verfügbar.

Auch die IO-Baffle ist integriert

Kann die zeitaufwändige Installation erheblich reduzieren

Kann auch mit dem diesmal verwendeten Chassis übereinstimmen

Als Grafikkarte kommt diesmal die Zotac RTX3080Ti PGF zum Einsatz, die wir in der Live-Übertragung evaluiert haben.

Dieses Mal ist es unser Ziel, 3A-Meisterwerke in 4K . spielen zu können

Unter diesen Karten ab 3080 und aufwärts

80ti ist relativ einfach zu kaufen, weil es die Rechenleistung sperrt und die Prämie nicht viel ist.

Noch günstiger als der Marktpreis von 3080

Dieser RTX3080Ti PGF verwendet den gleichen Kühlkörper wie der 3090 PGF

8 Heatpipes und drei Lüfter, sehr leistungsstark und leise

Mit drei 8PIN-Stromeingängen kann der 3080Ti PGF eine Leistungsaufnahme von 400 W erreichen

Laut unseren vorherigen Grafikkarten-Testergebnissen

3080Ti PGF hat im Grunde den 3090 ausgeglichen, der den Stromverbrauch manuell auf 380 W zieht

Obwohl der Videospeicher um die Hälfte reduziert wird, wird er beim Spielen grundsätzlich nicht so viel wie 24G genutzt.

3080Ti kann als sehr gut als Spielkarte bezeichnet werden

Im Aussehen gibt es viele RGB-Lichter auf drei Seiten des 3080Ti PGF

Egal aus welchem ​​Blickwinkel es sehr cool aussieht

Aber ist Ihr Gastgeber nicht schwarz-weiß thematisiert?

Warum eine RGB-Grafikkarte verwenden?

Ich verwende eine RGB-Grafikkarte, schalte das weiße Licht ein, dann gibt es kein RGB

Das Netzteil ist das, was wir während unserer letzten Tests verwendet haben

Chaser REVOLT X 1200W Platinum Dual System Netzteil

Dieses Netzteil wird von Haiyun mit einer 12-jährigen Garantie hergestellt und seine Leistung ist sehr gut.

Obwohl diese Konfiguration keine so hohe Wattzahl verbraucht

Unsere Hände sind nur so groß

Aber es gibt eine lange Garantie mit großer Wattzahl und ein hochwertiges Netzteil, das für immer verwendet werden kann

Mit verschiedenen Konfigurationen wird es in den nächsten zehn Jahren kein Problem geben

Darüber hinaus ist das duale System das markantere Merkmal dieses Netzteils.

Bedeutet, dass ein Netzteil zwei Computersätze betreiben kann

Passen Sie ihren P500A und andere Chassis an

Zwei Computersätze können an einen Host angeschlossen werden

Ein Satz Spiele, ein Satz Live-Übertragungen ist sehr praktisch

Für dieses Ratenthema

Wir haben auch einen alten Freund Black Umbrella gefunden, um einen Satz von schwarz-weißen Bären-Farbanpassungsmodullinien anzupassen

Die Wirkung soll gut sein

Die Erinnerung stammt vom C9BLH-Partikel des Yingruida-Speichersticks aus Yiwangs Schatzpavillon

Die Farbe ist weiß und passt zum Thema

Die Farbe ist weiß und passt zum Thema

Die Kapazität dieses Speicherpaares beträgt 16G x 2

Die Kapazität dieses Speicherpaares beträgt 16G x 2

Die eingebaute XMP-Frequenz beträgt 3600 C16-18

Einfach bequem mit dem neuen Core 11. Generation Speichercontroller zu verwenden

Der Core-Speichercontroller der 11. Generation ist der gleiche wie der von nebenan

Wenn die Speicherfrequenz hoch ist, nimmt die Frequenzteilungsleistung ab.

GEAR1 oder 1:1 Frequenzteilungsmodus, die meisten von ihnen können nur die Frequenz von 3733 . erreichen

Die Erinnerung an C9BLH ist schon süßer, wenn man direkt ein XMP öffnet

Sie können auch die Sequenz drücken

Zu 3600 C16-16-16-36 so

Das Paar in unseren Händen kann zwei Runden des TM5-Stresstests bestehen

Die hier verwendete Systemfestplatte ist PCIE 4.0 Solid State mit Leistung in der ersten Stufe

Western Digital SN850 1TB

Hauptsächlich, weil der Festkörper von GALAXY müde ist

Zufällig fuhr auch Western Digital Anfang dieses Monats eine Welle von Autos

Wenn SN850 1 TB mehr als 70 % belegt

Es sind noch etwa 7000 Reads vorhanden

Ein oder zwei G-Lese- und Schreibvorgänge können auch außerhalb der Verlangsamung erreicht werden

Diese Leistung kann als sehr kraftvoll bezeichnet werden

Wir haben den Koffer tatsächlich sehr früh zurückbekommen, aber weil wir nie die Chance hatten, ihn zu benutzen

Und das Phantom von Antec, das schon lange im Lager liegt

Obwohl diese Art von geneigten offenen Chassis nicht der erste ist, den Antec herstellt

Aber die Verarbeitung und das Design des Phantom sind sehr gut

Die beiden Farben von Phantom, Schwarz und Weiß, sind sehr passend und haben ein Gefühl für Hierarchie

Auch die Geometrie der Teile ist sehr ansehnlich

Erweckt den Eindruck eines Science-Fiction-Raumfahrzeugs

Die Farbabstimmung dieser Installation basiert auf diesem Chassis.

Der gesamte Körper des Phantom besteht aus CNC-geschnittenem 3 mm Aluminiumlegierungsblech

Die Textur ist ziemlich hochwertig

Auch der Preis ist relativ High-End

An der Vorder- und Oberseite des Chassis kann jeweils ein 360 Wasserkühler verbaut werden

Was den Windkanal angeht

Ich habe es nicht getestet, ich wusste, dass es sehr gut sein muss, voller Atmungsaktivität

Dieser Host ist doppelseitiges gehärtetes Glas

Der Vorteil ist, dass der Host, wenn er gut installiert ist, noch cooler aussieht

Der Nachteil ist, dass Ihre Kabelverwaltungsebene deutlich sichtbar wird.

Der Radiator verwendet Be quiet! SILENT LOOP 2 360 Wasserkühlung

In der vorherigen Bewertung von 51972 schnitt Bitco PURE LOOP 360 besser ab als Okus 480 Wasserkühlung

Der höher positionierte SILENT LOOP sollte theoretisch stärker sein.

Der andere ist Be quiet! Dieser Hersteller ist derselbe wie sein Markenname

Ich hatte immer ein höheres Streben nach Stille

Diesmal verwenden wir einen offenen Fall, bei dem eine Partition fehlt

Die Tonqualität des Gastgebers wird besser sein

Und so ein schöner Computer muss auf dem Desktop verwendet werden

Der Heizkörper ist leiser und angenehmer zu bedienen

Schließlich habe ich festgestellt, dass Bicoo auch einen reinweißen Lüfter hat, Shadow Wings 2, der auch der wichtigste leise Lüfter ist.

Wird nur verwendet, um die drei Lüfterslots an der Vorderseite des Gehäuses zu füllen

Obwohl das Gehäuse dieses Mal anscheinend nicht viel auf den Luftkanal achten muss

Aber das Auftreten und die Zufriedenheit einer Zwangsstörung sind immer noch sehr wichtig

OK, die gesamte Hardware ist fertig

Als nächstes genießen wir den Prozess des dicken Jungen, der es aufstellt.

Das fertige Produkt ist ziemlich hübsch

Das heißt, wenn der Computer im Standardzustand installiert ist, befinden sich alle Lichter des Computers im RGB-Modus und es gibt auch RGB auf dem Kaltkopf.

Nach einigen Anpassungen durch die Software können wir endlich unser ursprüngliches Ziel erreichen

Die Maschine ist installiert, bevor Sie mit dem Probespielen beginnen, müssen Sie einige Übertaktungs- und andere Einstellungen vornehmen

Der erste ist der Speicher, öffnen Sie XMP direkt, es ist bereits 3600

Drücken Sie einfach die Sequenz ein wenig und ziehen Sie die Spannung auf 1,4 V.

Dann gibt es die Übertaktung der CPU, die sich von der hirnlosen 5G-All-Core-Generation der vorherigen Generation 678910 unterscheidet

11700K ist nicht geeignet, um alle Kerne zusammen zu laden.Die Frequenz seiner Einzelkernenergie wird viel höher sein als die von mehreren Kernen.

Hier verwenden wir also eine Übertaktungsmethode, die die Frequenz entsprechend der Anzahl der belegten Kerne anpasst

Kann die Bedürfnisse verschiedener Anlässe erfüllen

Die volle Kernfrequenz ist diesmal auf 4,8 eingestellt

Mit diesem 60SP-Score können wir All-Core 5G erreichen

Aber der Stromverbrauch muss stark erhöht werden, das ist meiner Meinung nach nicht sehr wirtschaftlich

Auf der Seite Spezifischer Kern unten können Sie sehen, dass es zwei mit Sternchen gekennzeichnete Kerne gibt

Dies bedeutet, dass diese beiden die besten im Körperbau sind, wir fügen eine 5.2G-Einstellung hinzu

Wenn Single-Core-Anwendungen auf diese Weise ausgeführt werden, werden diese beiden Kerne zuerst auf eine höhere Frequenz erhöht

Scrollen Sie weiter nach unten, die vorherigen Online-Legenden, dass der Core Super RING der 11. Generation das Spiel verbessert hat

Aber wir haben es probiert und es hat nicht viel gebracht

Die Spannung und der Stromverbrauch steigen viel mehr

Verschiebe es also nicht hierher, behalte einfach AUTO

Dann muss die Super-CPU generell die Spannung erhöhen

Adaptiver Modus wird hier ausgewählt

Auf diese Weise wird die Spannung flexibler und die Spannung sinkt auch, wenn die Last ausgeschaltet ist, was Strom spart

Passen Sie einfach die Offset-Einstellung unten auf AUTO . an

Das Motherboard von ROG wird dir automatisch super gut helfen

Die im adaptiven Modus angegebene Spannung ist auch angemessen

Eher für Anfänger und faule Leute wie mich geeignet

Die Spannungskorrektur muss natürlich noch eingestellt werden

Stellen Sie einfach die vom Motherboard empfohlene Stufe 4 ein

Dann die Frequenzanpassung von AVX512

Obwohl AVX512 sehr stark ist, wenn es verwendet werden kann, verbraucht es viel Wärme.

Passen Sie also den negativen Offset hier an

Ich habe es auf 5 gesetzt, was bedeutet, dass bei Verwendung des AVX512-Befehlssatzes

Verringern Sie die Frequenz um das 5-fache, dh sie wird 4,3 G

Wenn Sie den AVX512-Befehlssatz überhaupt nicht benötigen, können Sie ihn auch ausschalten.

Schließlich die Resizable BAR-Funktion, die von den neuesten Grafikkarten der 30er-Serie und Intel-Plattform-Updates unterstützt wird

Erlauben Sie der CPU, auf den gesamten Videospeicher zuzugreifen

Nach dem Einschalten dieser Funktion kann die Anzahl der Spielbilder um bis zu 10 % erhöht werden.

So viel Verbesserung von 3080 auf 3090

Das Motherboard von ROG befindet sich in den erweiterten PCI-Subsystem-Einstellungen

Schalten Sie einfach den zweiten Punkt ein

Nachdem Sie das System eingegeben haben, in den Systeminformationen in der unteren linken Ecke der NVIDIA-Systemsteuerung

Sie können sehen, ob es erfolgreich eingeschaltet wurde

Nachdem alle Anpassungen vorgenommen wurden, habe ich einfach ein paar Tests durchgeführt

Weil je nach Anzahl der Kernberufe unterschiedliche Frequenzen festgelegt werden

Sowohl die Single-Core- als auch die Multi-Core-Performance im Cinebench sind gut

Im Gegensatz zur herkömmlichen All-Core-Übertaktungsmethode wird die Single-Core-Leistung geopfert

Im TimeSpy-Test habe ich eine Gesamtpunktzahl von fast 1W8 erhalten, was eine hervorragende Bewertung ergibt

Dann könnt ihr endlich mit dem 4K-Spieletest starten

Neben dem 3A-Meisterwerk Light Chasing 4K60

Ich möchte auch die 4K 144 von E-Sport-Spielen ausprobieren

Also haben wir den ROG XG43UQ Monitor für ein weiteres Video herausgezogen

Es ist ein 43-Zoll-4K 144-Monitor oder HDR1000

Sehr groß und sehr angenehm

Und es ist zufällig schwarz-weiß, was perfekt zum Thema passt

Das erste Spiel ist also zunächst Cyberpunk 2077, das für seine schlechte Optimierung bekannt ist.

Bei hoher Bildqualität haben wir den Einfluss der Bildanzahl ausgeschaltet

Aber es gibt keine volumetrische Wolke und keinen volumetrischen Nebel, die das Bild verbessern

Stellen Sie die Lichtverfolgung auf mittel und schalten Sie die Leistungsstufe DLSS ein

Mit dem Segen von Resizable BAR

Im Erdgeschoss von Vs eigenem Haus ist das Bild kompliziert und stark ausgefallen, und der höchste Frame kann fast 70 Frames betragen.

Das Schwert im Stein kann selbst bei zufälligen Kollisionen in der Stadt über 60 stabilisiert werden.

Es ist sehr erfrischend zu spielen

Dann gibt es da noch das Raytracing-Display-Spiel Control, das Huang zuvor beworben hat.

Mit der voreingestellten hohen Bildqualität und DLSS erreichte die Anzahl der Bilder mehr als 70

Mit anderen Worten, die Bildqualität kann sogar noch höher sein

Für die diesjährigen Mainstream-Spiele hat diese Konsole im Grunde keinen Druck

Komm her ist das eben erwähnte E-Sport-Spiel, das Hühnchen in 4K-Auflösung isst

Wenn die Bildqualität auf Full Ultra High eingestellt ist, können nach der Landung etwa 200 Frames vorhanden sein

Kann das Top-Display von 4K144 problemlos steuern

Natürlich ist die Modellierung des Hühnchenessens einfacher

Also haben wir auch die COD-Kampfzone laufen lassen und die Bildqualität ist die Standardeinstellung

DLSS im Leistungsmodus aktivieren

Die Anzahl der Frames im Spiel kann mehr als 150 Frames erreichen

Kann die Anforderungen des E-Sport-Levels erfüllen

Als nächstes haben wir einen Backmaschinentest durchgeführt

Nach einer halben Stunde Gaming stabilisierte sich die Grafikkarte auf 80 Grad und die CPU lag innerhalb von 70 Grad.

Obwohl die Eingangsleistungsaufnahme der gesamten Maschine mehr als 600 Watt erreicht hat

Den Großteil macht aber vor allem die Grafikkarte aus, immerhin die Grafikkarte mit Top-Gaming-Performance

Zu diesem Zeitpunkt beträgt der vor dem Monitor gemessene Geräuschpegel etwa 45 Dezibel

Fast das gleiche Volumen wie im täglichen Leben

Diese Lautstärke wird blockiert, wenn Sie den Spielsound deutlich hören können

Der Sound kommt hauptsächlich von der Grafikkarte und die Wasserkühlung von Bicou ist zu diesem Zeitpunkt sehr leise

Dann gibt es noch eine Backmaschine, die den R23 des AVX-Befehlssatzes plus AIDA64-GPU und Donuts verwenden kann

Zu diesem Zeitpunkt ist der Stromverbrauch der CPU relativ hoch, er beträgt bis zu 250 W, evlla信用卡 was mehrere zehn Watt höher ist als die Ruhefrequenz.

Aber das Erstaunlichere ist seine Temperatur

Es ist immer noch niedriger als das 200W 5900X, nachdem ich den Deckel geöffnet und poliert habe.

Zu diesem Zeitpunkt beträgt die Lautstärke der gesamten Maschine etwa 50 Dezibel

Denn der wassergekühlte Lüfter läuft mit 2100 U/min auf Hochtouren

Als Highspeed-Lüfter ist die Lautstärke akzeptabel

Im Allgemeinen muss der CPU-Kühler nur bei längerem Rendern mit voller Geschwindigkeit arbeiten

Generell werden 4K-Spiele, die in den letzten zwei Jahren unerreichbar waren, nun endlich realisiert.

Die Verbesserung der Grafikkarte der 30er-Serie ist in der Tat erwähnenswert

Die Prämisse ist, dass Sie eine Karte kaufen können

Glücklicherweise mit der kürzlichen Einführung der Lock-Hashrate-Grafikkarte und der Verwaltung der Mine

Mit der harten Arbeit der Kartenleiste ist der Preis der Grafikkarte nach und nach auf dem richtigen Weg.

Bei Produkten mit zu hoher Prämie, wenn Sie sie nicht kaufen, werde ich sie nicht kaufen, und die Grafikkarte kann um zweihundert reduziert werden

Es hängt davon ab, wann die Festplatte zurückkommt

Darüber haben wir auch in der Live-Übertragung zuvor gesprochen

Ursprünglich plante der Taobao Store, den Service von benutzerdefinierten NAS zu eröffnen

Plötzlich wurde die Festplatte zu viel zum Kaufen

Glücklicherweise haben sich die CPU- und SSD-Preise in letzter Zeit allmählich erholt

Es gibt noch Hoffnung für den DIY-Markt

Abschließend möchte ich auf die Fragen vieler Leute antworten: Wir machen das MATX-Chassis.

Kann MATX-Motherboard plus Standard-ATX-Netzteil plus 360-Wasserkühlung unterstützen

Oder verwandeln Sie sich in drei 360 ​​Cold Row plus ITX-Motherboard plus SFX-Stromversorgungsmodus

22,5 Liter, außen

Es sollte in der Lage sein, vor Double 11 herauszukommen

Also endet dieses Video hier

Wenn es Ihnen gefällt, denken Sie daran, es zu mögen und zu kommentieren, um es zu unterstützen

Neue Zuschauer werden die spannenden Inhalte nicht verpassen, nachdem sie zum Abonnieren geklickt haben

Ich bin King Wing, bis zum nächsten Mal, tschüss~!

fake plants decor alibaba faux plants vendor

planerar att göra ett köp

onemoreview.com är här för att hjälpa dig att göra

det bästa valet

våra expertrecensioner hjälper dig att

välja rätt produkt

vi alla gillar tanken på att ha naturliga

element runt huset

de bästa konstgjorda växterna och blommorna

2021

ja tack men om du har inte en grön

tumme

det spelar ingen roll vilken typ av kunskap

du har om de bästa konstgjorda

växterna i blommor 2021

eftersom de kommer att vara döda och även om

du inte är en naturligt född

växtmördare om det blir hektiskt runt huset

och ärligt talat

när de inte är hektiska kan

du glömma att vattna och kolla

jord och flytta runt saker för att undvika

snedstreck locka till sig solljus

igen du kommer att ha växter som

dör

säkert du kan prova dig fram på några

bästa konstgjorda växter i blommor 2021

men du kanske kommer att upptäcka att du kan döda

dem också för att undvika att skada dina

växter.

bättre än att du inte är det

och de gör det inte du kan bli förvånad över

hur

långt fauxväxter har kommit genom

åren faktiskt

dessa 10 konstgjorda växter ser så bra ut att

du kan behöva stoppa dina vänner och

familj från att försöka vattna dem

och med all den tid du sparat utan att

behöva ta hand om dina konstgjorda

växter

kommer du nu mer tid att njuta av dem i

denna recension

vi kommer att diskutera i detaljer om

de bästa konstgjorda växterna och blommorna

2021 som finns på marknaden idag

skapades denna lista baserat på mina

synpunkter och

kostnadsläget på marknaden den erhölls

efter timmar av undersökningar

och den har listats baserat på ekonomiska

egenskaper och priserna på varje strandstol

i denna lista är olika alternativ

tillgängliga för köpare

så om du behöver bästa artificiella

växter och blommor 2021 denna lista kommer att

visa de tillgängliga produkterna för att

om du vill ha mer information i pris,

vänligen kolla produktlänken under

beskrivningen

snälla su prenumerera på vår kanal för fler

uppdateringar

ytterligare en vy nuvarande topp 10 bästa

konstgjorda växter och blommor 2021

låt oss komma igång med listan över de

bästa konstgjorda växterna och blommorna 2021

nummer ett silke trädlager

konstgjorda boston ormbunke buske

arrangemang

har en siden vår typiska boston

ormbunke av silke tree lagerföretag

inc

kommer barrotad inte i behållare

visade

88 grenar 48 tums spridning

kolla produktlänk och pris på

videobeskrivning nedan

vänligen prenumerera på vår kanal och tryck

på ringklockan för fler uppdateringar

nummer två nästan naturliga 6681

gropar med dekorativa bas sidenväxt

har inget underhåll som krävs

rika patosblad ger levande

grönska inomhus

övergripande produktdimensioner 15 och hx29

i bx 20 i d vårt urval av

konstgjorda siden träd

växter blommor

kolla produktlänk och pris på

videobeskrivning nedan

nummer tre vickerman fyra fot

artificiell naturlig ficus bush

har 950 löv som varierar i nyanser

siden och plast av varierande storlek lövverk

för ett naturligt utseende

perfekt för inomhusbruk underhållsfritt

kolla produktlänk och pris på

videobeskrivning nedan

nummer fyra nästan naturliga 5289 gyllene

sockerrör palmsilke

har frodiga och tropiska

verklighetstrogna bladkrukor fake outdoor plants china (fauxplants.evlla.com) i lokaliserad

en av de finaste siden palmer erbjuder vi

inget underhåll,

kolla produktlänk och pris på

videobeskrivning nedan

nummer fem nästan naturliga

6607 spindelhängande korg dekorativa

sidenväxtfunktioner spindelvassa lövverk sträcker sig

bortom behållare

försköna alla uteplatser eller kontorslokaler

komplett med dekorativa hängande

korgartiklar mått lxbxh 27x27x

27 tum

kontrollera produktlänk och pris på

videobeskrivning nedanför

nummer sex nästan naturliga 4106

cederträ bonsai siden växt

funktioner på 16 tum lång

inget underhåll krävs övergripande produkt

dimensioner

16 i hx 16,5 och wx12 och d

konstigt trimmade bonsai replika

kontrollera produktlänk och pris på video

beskrivning nedan

snälla s prenumerera på vår kanal och tryck

på ringklockan för fler uppdateringar

nummer 7 vickerman 4 capensia buske i

fyrkantig pilbehållare

har varierande storlek på lövverk för ett

naturligt utseende

frodigt lövverk som passar alla dekor

standardfyllda

16 plus lövverk,

kolla produktlänk och pris på

videobeskrivning under

nummer åtta nästan naturlig agave med

svart planterings konstgjord växt

har starka och slående

verklighetstrogna

lövunderhållsfria dimensioner 30hx 17wx17d

vackra produktlänk året runt

och pris på

videobeskrivning nedan

nummer nio för skafferi konstgjorda

monstera deliciosa anläggningar

har underhållsfria

realistiska gjutna stammar och blad

primping av grenar eller löv kan

krävas för att matcha bilden

fantastiskt realistiskt

[Musik]

kolla produktlänk och pris på

videobeskrivning nedanför

nummer 10 nästan naturliga 6 fot ficus

konstgjorda träd

funktioner till skillnad från det riktiga ficus trädet

inget underhåll krävs mäta sex

fot i höjd

över ett tusen och åtta individuella

löv pryder detta träds stam

och flera grenar silkträd

tillverkas med syntetmaterial,

kolla produktlänk och pris på

videobeskrivning nedan

för att titta på oss, prenumerera på vår

kanal

för fler uppdateringar